Sensor converter (temp)
Hello everybody,
Accurate operation of temperature sensors requires a reliable signal converter. Therefore, we offer signal converter models for basic temperature sensors.
Dear visitor, we have products specifically designed for each sensor type or supporting multiple sensor models. Our signal converters are usually ready for use without any additional operation. However, in some cases, they may require user-defined calibration.
DERELL Temperature Sensor → Signal Converter (0-10V / 4-20mA / PWM)
Input: Temperature Sensor
Hot Surface
Temperature (°C):
120°C
Range:
Min
Max
Signal Converter Settings
Output Type:
0-10V: Vout = 10 × (T − Tmin) / (Tmax − Tmin)
Conversion Ratio (0…1): 0.40
Output
4.00 V
Voltage (0-10V)
mA: 10.4 mA
PWM: 40.0%
Volt: 4.00 V
Note: The 4-20mA output is a current loop; the actual voltage depends on source and load. PWM represents the same range as duty cycle percentage.
For example, an analog converter with a range of 0-200 degrees may require a different temperature range, such as 0-350 degrees, in another device. In such cases, we recommend considering the maximum temperature value when placing an order. We can calibrate our devices according to your needs when you place an order.
Most of the time, our converters are used for devices with direct analog signal input, such as PLC or AC drives. For example, when creating a speed control application, you can directly connect to your drive without requiring additional hardware and run the PID control format.
We have prepared all the signal converters you need to make reliable and accurate measurements with temperature sensors. Please take a look at our products and do not hesitate to contact us if you have any questions. Thank you.
/ All models of temperature sensors
/ Pt 100 converters/transmitters
/ VFDs (Variable Frequency Drives) -
Pt100 4-20mA converter v1
Hi,You can see our Pt100 to analog converter product.It has 2 or 3 wire Pt100 sensor input and 4-20m..
25.00USD Ex Tax: 25.00USD
Showing 1 to 1 of 1 (1 Pages)