Toshiba S7 User Manual
The following conditions are displayed on the operation panel.
1) Frequency, 2) parameter display or changes, and 3) inverter condition during operation or in case of an error
Keys
MON key:
- Selects 1), 2) and 3) in this order. Pressing the MON key displays the first item of the following mode. In the parameter display or change mode, "AUt" is displayed. In the inverter condition display mode, "Fr--F" or "Fr--r" is displayed.
ENT key:
- Selects the displayed item or stores it in the inverter.
UP key:
- Displays the next item or increases a numeric value.
DOWN key:
- Displays the previous item or decreases a numeric value.
Display Unit
- Running (During inverter output)
- ON when displaying the inverter condition
- ON when displaying the parameter set value
Mode 1):
- The operation frequency is displayed, or error contents are displayed when an error is displayed.
Mode 2):
- A parameter name or parameter set value is displayed.
Mode 3):
- The inverter condition is displayed.
- If you become confused during operation, press the MON key several times to return to the frequency display.
- The VF-S7 has three convenient automatic operation functions (automatic acceleration and deceleration, automatic torque boost, and automatic environment setting). In the following operation, parameters do not need to be set. (These functions may not work properly for some load conditions.)
Acceleration and deceleration time: Automatic
Torque boost: Automatic torque boost or vector operation control
Environment setting: Motor base/maximum frequency 50/60 Hz selection
- Displays for operations
This manual uses the symbols shown below to indicate the LED displays and panel key operations.
LED display (Numeric values)
+ Toshiba S7 (pdf)
+ Toshiba S7 User manual (pdf)
+ Toshiba S7 Serial communication (pdf)
+ Toshiba S7 Harmonic (pdf)
+ Toshiba S7 Communication PCM001z (pdf)
-----+ Toshiba S9 User manual (detail) (pdf)
+ Toshiba S9 PMC01z User manual (pdf)
+ Toshiba S9 Communication (pdf)
+ Toshiba S9 Parameter list (pdf)
+ Toshiba S9 Functional manual (pdf)
+ Toshiba S9 User manual (pdf)
(1) Turn on the power.
(2) Press the MON key until AUt is displayed on the display unit.
(3) Select the desired parameter name from the parameter list. Press the DOWN or UP key until the parameter name is displayed.
(4) When the desired parameter name is displayed, press the ENT key. The parameter set value is displayed.
(5) To change the parameter set value, press the DOWN or UP key.
(6) To store the displayed parameter set value in the inverter, press the ENT key. The parameter name and changed set value are displayed alternately, then the parameter name is displayed.
(7) To set another parameter, carry out the same sequence from step (3).
(8) To finish parameter setting, press the MON key twice. The current frequency is displayed.
+ VFD Main page -
-