Hans Christian Oersted

Hans Christian Ørsted: The Discovery That Connected Electricity and Magnetism
Hans Christian Ørsted (1777–1851) was a Danish physicist and chemist whose 1820 discovery that an electric current could deflect a compass needle helped launch the study of electromagnetism. His name is also written as Hans Christian Oersted. His experiment showed that the effects of electric current extend into the space around a conductor.
That connection provides a starting point for understanding electromagnetic relays, electric motors, and magnetic current sensing. Ørsted did not invent all these devices. His achievement was to establish an experimental link between electricity and magnetism that other scientists and engineers could investigate and develop.
What happened in the compass experiment?
Working in Copenhagen, Ørsted placed a wire from a battery circuit close to a compass. When current flowed through the wire, the compass needle changed direction. He investigated the effect in different arrangements and published his findings in July 1820.
The familiar story of an accidental discovery during a lecture leaves out an essential part of the work: Ørsted was already looking for a relationship between electrical and magnetic phenomena. Repeating the observation and establishing the conditions under which it occurred made the result scientifically useful.
The needle was not simply being pulled towards the wire. A compass tends to align with the resultant magnetic field at its location. The wire's field combines with the Earth's field and any other nearby magnetic influences. Its position and orientation therefore matter; the same current does not produce the same deflection in every arrangement.
Which way does the field around a wire point?
A long, straight current-carrying wire has circular magnetic field lines in planes perpendicular to the wire. The right-hand grip rule gives their direction: point your right thumb along conventional current, and your curled fingers show the direction of the field. Reversing the current reverses the field produced by the wire.
A steady direct current can produce a steady magnetic field. With alternating current, the field changes as the current changes. A current does not have to vary with time to produce a magnetic field. Producing a field and inducing a voltage through changing magnetic flux are distinct effects.
Is there an “Oersted's law”?
The phrase sometimes refers to his discovery, but it should not suggest that Ørsted formulated all the quantitative laws linking current and magnetic field. Fields produced by steady currents are calculated using the Biot–Savart law or, where symmetry makes it useful, Ampère's law. André-Marie Ampère was a central figure in developing the study of magnetic interactions between currents after Ørsted's announcement.
Outside a sufficiently long, straight wire in air, a useful approximation is B = μ0I / (2πr). B is magnetic flux density, I is current, r is distance from the wire's axis, and μ0 is the permeability of free space, approximately 4π × 10−7 H/m. Nearby return conductors, magnetic materials, and the finite length of a real wire can change the result.
Worked example: For a wire carrying 5 A, the ideal model gives approximately 50 µT at a distance of 2 cm. Doubling the current to 10 A gives 100 µT. Keeping the current at 5 A and moving to 4 cm gives 25 µT. These values describe the wire's contribution; they do not, by themselves, predict a compass angle or the total field inside a control cabinet.
Oersted, tesla, and amperes per metre
The oersted (Oe), named in his honour, is a CGS unit of magnetic field strength H. The corresponding SI unit is the ampere per metre (A/m): 1 Oe = 1000/(4π) A/m ≈ 79.577 A/m.
The tesla (T) is the SI unit of magnetic flux density B. Oersted and tesla therefore measure different quantities. The relationship between B and H depends on the medium's magnetic properties; a single conversion factor cannot be applied to every material and operating condition, especially in ferromagnetic materials.
Where does this connection appear in industrial equipment?
Relays and contactors: In an electromechanical relay, current through a coil creates a magnetic effect that moves an armature and changes the contact state. Electromagnetic contactors use the same basic relationship. The difference between a relay and a contactor involves more than physical size: load characteristics, switching capacity, and intended duty matter too.
Coils and inductance: Arranging wire in turns concentrates the magnetic field in a useful region. When coil current changes, the associated flux changes and induces a voltage opposing that change. Components such as DC bus chokes use this inductive behaviour to limit current ripple. Core properties, turn count, and saturation help determine the practical limits.
Current measurement: A clamp meter uses the magnetic effect around a conductor to measure current without opening the circuit for a series measurement. Conventional current-transformer designs measure AC; suitable Hall-effect designs can measure AC and DC. Understanding the differences between current sensors, Hall sensors, and current transformers helps explain why not every clamp meter can measure DC current.
Why clamp around one conductor? For a load-current measurement, putting both outgoing and return conductors inside the jaws allows the effects of equal and opposite currents to cancel. The reading can be close to zero even while the load is running. Leakage-current measurement is a separate application that deliberately examines the imbalance.
Motors and cabinet layout: Electric motors turn interactions between currents and magnetic fields into motion. Unwanted coupling can also disturb measurement circuits. When investigating electromagnetic interference, conductor routing, return paths, and the proximity of sensitive circuits to power wiring are therefore relevant.
How does Ørsted's discovery differ from Faraday's induction?
Ørsted demonstrated the magnetic effect of an electric current. Michael Faraday's work on induction in 1831 established that a change in the magnetic flux linked with a circuit produces an electromotive force. Whether a current then flows also depends on the circuit and the availability of a closed conducting path.
This distinction helps explain why transformers rely on changing magnetic flux. Leaving a stationary magnet beside a stationary coil does not continuously induce a voltage in that coil.
His background, aluminium research, and work in education
Born in Rudkøbing, Denmark, in 1777, Ørsted trained in pharmacy and pursued physics, chemistry, and natural philosophy. Alongside his work at the University of Copenhagen, he became the first director of Den Polytekniske Læreanstalt, founded in 1829 and now the Technical University of Denmark (DTU). He remained in that role until his death in 1851.
In 1825, he reported an early preparation of metallic aluminium using aluminium chloride and potassium amalgam. The material was not a high-purity product made on an industrial scale. His work illustrates an important distinction in the history of materials: producing a metal in a laboratory and developing an economical manufacturing process are separate achievements.
Ørsted also founded Selskabet for Naturlærens Udbredelse, a society dedicated to bringing natural science to a wider public, and wrote philosophical works. His contribution to science included teaching and public engagement as well as experimental discovery.
This article introduces the history of science and basic electromagnetic concepts. The text may be shared with attribution to OtomasyonAVM; image reuse rights must be checked separately.