André-Marie Ampère

André-Marie Ampère: Current, Magnetism, and the Birth of Electrodynamics
André-Marie Ampère (1775–1836) was a French physicist and mathematician who investigated the forces between electric currents through experiment and mathematics. He is regarded as a founder of electrodynamics. The SI unit of electric current, the ampere (A), is named in his honor.
One question captures the direction of his research: if a current can move a compass needle, can two current-carrying conductors exert forces on each other? Answering it meant moving beyond observing a connection between electricity and magnetism to predicting the direction and magnitude of the resulting forces.
Life and academic career
Ampère was born in Lyon on January 20, 1775. Much of his early education took place at home and through independent reading, with mathematics and the natural sciences attracting his attention early on. In 1804, he took up a teaching position in mathematical analysis at the École Polytechnique. His interests also included chemistry and philosophy.
In 1814, he was elected to the geometry section of the French Academy of Sciences. He was therefore an established mathematician before the electrical research for which he is best remembered. He held the Chair of General and Experimental Physics at the Collège de France from 1824 to 1836. Ampère died in Marseille on June 10, 1836, during an inspection tour.
1820: from Ørsted's observation to Ampère's experiments
In 1820, Hans Christian Ørsted showed that an electric current could deflect a nearby compass needle, directly linking current with a magnetic effect. When François Arago reported Ørsted's findings in Paris, Ampère quickly began investigating further.
His experiments went beyond the interaction between a current and a magnet. He investigated how current-carrying conductors could attract or repel one another without a permanent magnet between them. He began presenting his findings to the Academy in September 1820, establishing the basis for his research into electrodynamic forces.
Sources such as Alessandro Volta's battery made these experiments possible. Their contributions were distinct: Volta advanced the supply of sustained current, Ørsted demonstrated its magnetic effect, and Ampère developed a systematic account of interactions between currents.
Why do current-carrying wires attract or repel?
Two long, parallel conductors attract when their currents flow in the same direction and repel when the currents flow in opposite directions. Direction here means conventional current direction. The wires do not have to be made of iron: current-carrying copper conductors also experience magnetic forces.
For steady currents in two ideal, thin, very long parallel conductors in vacuum, the force magnitude per unit length is F/L = μ0 × I1 × I2 / (2πd). I1 and I2 are the currents, d is the separation, and μ0 is the permeability of vacuum. Actual circuits also depend on conductor geometry and the location of the return paths.
A useful consequence: doubling both currents while keeping the spacing unchanged produces four times the force. Doubling the spacing at unchanged currents halves it in this ideal model. This helps explain why high fault currents can create severe mechanical stress in switchboards, although actual busbar design requires a fuller assessment of geometry and short-circuit conditions.
What does Ampère's law describe?
In modern textbooks, Ampère's circuital law relates the line integral of the magnetic field around a closed path to the net current passing through a surface bounded by that path. For steady currents in vacuum, it is written ∮ B · dl = μ0Ienclosed. B is the magnetic flux density, and the enclosed current is an algebraic sum with signs set by the chosen orientation.
This says more than simply “a current produces a magnetic field around a wire.” However, the modern field equation should not be presented as a formula Ampère wrote in exactly this notation in 1820. His original research focused on forces between current-carrying circuits. He brought his work together in the 1826 publication Théorie des phénomènes électro-dynamiques, uniquement déduite de l'expérience.
James Clerk Maxwell later added the displacement-current term to account for changing electric fields. The broader relation is therefore called the Ampère–Maxwell law. The simpler steady-current form cannot be applied unchanged to every time-dependent electromagnetic problem.
The scientist and the unit: what is an ampere?
The ampere is the SI base unit of electric current, with the symbol A. The relation 1 A = 1 C/s means a net charge flow of one coulomb per second through a cross-section. “Amp” is common in everyday speech, but technical unit notation uses A, as in 5 A, 16 A, or 0.2 A.
Since May 20, 2019, the SI definition has been based on fixing the elementary charge at exactly e = 1.602176634 × 10−19 C. The previous definition used the force between ideal parallel conductors. That older definition remains historically important, but it is no longer the current SI definition.
Ampère is the person, the ampere is the unit, and an ammeter is an instrument. An ammeter measures current. An ampere-hour (Ah) measures electric charge and is related to current multiplied by time: 1 Ah = 3,600 C. Amperes, volts, watts, and ampere-hours describe different quantities.
Where does this physics appear in coils and relays?
In electromechanical relays and contactors, coil current establishes a magnetic effect, and the magnetic circuit exerts force on a moving part. A coil's magnetomotive force is N × I. A 200-turn coil carrying 0.1 A therefore provides 20 ampere-turns.
Increasing current in that coil to 0.2 A produces 40 ampere-turns, but the pulling force does not necessarily double. Air gap, core material, saturation, and mechanical position all matter. With resistance held constant, copper loss follows I²R, so doubling the current produces four times the heating loss. Magnetic performance and temperature rise have to be considered together.
Common questions
Did Ampère discover electricity or magnetism? No. Both were known before his work. His distinctive contribution was to explain mechanical interactions between electric currents through experiments and mathematical analysis.
Is Ampère's law the same as Ohm's law? No. Ohm's law relates voltage, current, and resistance under appropriate conditions. Ampère's law concerns current and magnetic field. They answer different questions about a circuit.
Did Ampère invent all electromagnetic devices? No. Motors, generators, and measuring instruments developed through the work of many scientists and engineers. His electrodynamics was one of the foundational contributions used to understand such devices.
This article introduces the history of science and basic electrical concepts. The article text may be shared with attribution to OtomasyonAVM; image reuse rights must be checked separately.