6ES7 143-1BF30-0XB0
Siemens main menu › SIMATIC S7 › SIMATIC ET 200
Siemens 6ES7 143-1BF30-0XB0 — ET 200X EM 143-DESINA 8 DI/DO Expansion Module
6ES7 143-1BF30-0XB0 is an EM 143-DESINA expansion module for the ET 200X series within the Siemens ET 200 distributed I/O family. Each of its eight process channels can be configured individually as a digital input or digital output. It also provides eight function inputs configurable for diagnostics or normally closed contact functionality. This product in the ET 200 special-function and expansion module range operates with a compatible basic module.
Order number: 6ES7143-1BF30-0XB0
Series / module: SIMATIC ET 200X / EM 143-DESINA
Process channels: 8, individually configurable as DI or DO
Additional function inputs: 8, for diagnostics or NC functionality
Rated signal voltage: 24 V DC
Rated current per channel configured as an output: 1.2 A
Field connection: M12
Protection rating: IP67, with correctly fitted connections and covers
Understanding the input and output count
“8 DI/DO” does not mean eight independent inputs plus eight independent outputs operating simultaneously. Each of the eight process channels has a selected direction. For example, five can be used as inputs and three as outputs. Consider this flexibility when comparing ET 200 digital input modules and ET 200 digital output range. The additional function inputs have a separate role and must not be counted as eight extra outputs.
Five checks before selection or replacement
1. Basic module compatibility: Siemens product information A5E00125915-05 permits this expansion module with BM 143-DESINA RS485 (6ES7143-1BF00-0AB0), BM 143-DESINA FO (6ES7143-1BF00-0XB0), BM 141 ECOFAST (6ES7141-1BF00-0AB0 / 6ES7141-1BF01-0AB0) and BM 141 ECOFAST DIAG (6ES7141-1BF40-0AB0). When reviewing the ET 200 system architecture, membership of the ET 200X family alone is insufficient to establish compatibility.
2. Channel parameters: Check each process channel's input/output assignment and each function input's diagnostics/NC setting in the Siemens S7 hardware project. Record the existing parameters before replacement. Even an identical physical module can behave differently if its channel settings do not match the application.
3. M12 pins and cables: Pin 4 carries the process input/output signal, while pin 2 carries the diagnostics or NC function input. When selecting ET 200 connection components, verify conductor count and pin assignments. A connector fitting the socket does not establish that every function is wired correctly. Suitable covers on unused sockets and intact seals are important for maintaining IP67 protection.
4. Supply and load calculation: Assess the 1.2 A rated output current separately from sensor supply capacity. When planning ET 200 power supply components and ET 200 power distribution, check the combined load, temperature and basic module supply limits together. Keep the switched (S) and non-switched (NS) 24 V supplies distinct in the DESINA wiring arrangement, and verify which supply feeds each channel configured as an output.
5. Diagnostics and communication: Diagnostic information from this module is integrated into station communication through the basic module. When reviewing ET 200 communication options, do not treat EM 143 as an independent network interface. For a channel fault, check the process signal, function input, sensor supply and cable together. Diagnostic functionality does not make this a safety-rated F-I/O module.
Editor's note
The distinction between BM and EM matters here. Although some short product descriptions include BM143/DESINA, 6ES7143-1BF30-0XB0 is an expansion module. Record the basic module reference and channel settings when sourcing a spare. When comparing products through the Siemens main menu, do not rely on the “8 DI/DO” description alone.
Manuals and PDF documentation
On our Siemens ET 200 PDF and user manuals page, consult the ET 200X Distributed I/O Device manual. EWA 4NEB 780601602-06, section 7.16 describes EM 143-DESINA wiring and parameters. For basic module compatibility, read product information A5E00125915-05 alongside the main manual.
Related topics and Siemens navigation
Product family: Siemens main menu | SIMATIC S7 | ET 200 family
Station and field devices: Digital output modules | Additional modules | PROFIBUS and PROFINET
Technical resources: About ET 200 | Power supply modules | ET 200 PDF manuals