6ES7 132-7RD21-0AB0
Siemens main menu › SIMATIC S7 › SIMATIC ET 200
Siemens 6ES7 132-7RD21-0AB0 — ET 200iSP 4 DO 17.4 V/40 mA H-Shutdown Module
6ES7 132-7RD21-0AB0 is an ET 200iSP electronic module with four digital outputs and an H-shutdown input, part of the Siemens ET 200 distributed I/O family. It controls suitable valves, relays and actuators in intrinsically safe field circuits. When selecting among ET 200 digital output modules, assess its 17.4 V/40 mA output characteristic together with the external shutdown function.
Order number: 6ES7132-7RD21-0AB0
Outputs: 4 DO
Current per channel: 40 mA
No-load output voltage: 17.4 V DC
Additional input: Intrinsically safe H-shutdown signal
What does the 17.4 V rating mean?
The data sheet specifies 17.4 V as the no-load output voltage, with a characteristic break point of 11 V / 40 mA. A valve's voltage label alone is therefore insufficient for selection. Compare coil current, pickup requirements and cable voltage drop. Within the ET 200 system architecture, distinguish the role of ET 200 power supply modules from the electrical capability of the field output.
Five checks before selection or replacement
1. H-shutdown behaviour: An intrinsically safe high-level shutdown signal disables all four outputs together. It does not change the PLC output process image. An output bit can therefore remain set while the field output is de-energized. Confirm the external signal and wiring arrangement before selecting between H and L shutdown variants.
2. Field device and Ex compatibility: Assess the actuator's certified parameters together with those of the module and cable. Matching Ex markings alone does not establish an intrinsically safe circuit. When reviewing ET 200 safety modules, assess explosion protection and functional safety separately. The presence of a shutdown input does not establish PROFIsafe capability.
3. Parallel outputs: The permitted parallel arrangement provides 80 mA from two outputs. The manual specifies channels 0–1 and 2–3 on the same module. Do not combine arbitrary channels or outputs from different modules. Parallel operation requires the wiring, parameters and intrinsic safety assessment to be checked together.
4. Base and station: Confirm the appropriate ET 200iSP TM-IM/EM or TM-EM/EM base when reviewing ET 200 terminal blocks. Record the installed ET 200 connection modules, ET 200 communication interface and ET 200 power distribution arrangement. Similar naming does not establish compatibility between ET 200S and ET 200iSP components.
5. Project and diagnostics: Check the configured module, output addresses and CPU/master STOP behaviour in the Siemens S7 control system. Record wire-break or short-circuit messages with their channel details. As with other ET 200 special-function and additional modules, document the full order number, parameters and field wiring together.
Replacing 7RD21 with 7RD22, or vice versa
Siemens identifies 6ES7132-7RD22-0AB0 as the successor. The output characteristic break point changes from 11.0 V/40 mA to 10.7 V/40 mA, while the Ex parameter I₀ decreases from 132 mA to 118 mA. I₀ is not the nominal 40 mA operating current. In particular, fitting a 7RD21 in place of a 7RD22 requires reassessment of the actuator's permissible input current and project configuration. Follow the manufacturer's replacement instructions for the coding element.
Editor's note
Include the complete module code, valve or actuator label and H-shutdown wiring details in a spare-part enquiry. “A four-output ET 200 module” is not a sufficient specification. Retain the full suffix when distinguishing 7RD21, 7RD22 and L-shutdown versions.
Manuals and PDF documentation
On our Siemens ET 200 PDF and user manuals page, consult ET 200iSP, A5E00247483-04, section 12.2 and product information A5E02264172-06 for replacement conditions. Include the relevant certificate and ET 200iSP Intrinsic Safety Control Drawing in the Ex circuit assessment.
Related topics and Siemens navigation
Product family: Siemens main menu | SIMATIC S7 | ET 200 family
Station and field devices: Digital output modules | Terminal blocks | PROFIBUS and PROFINET
Technical resources: About ET 200 | Power supply modules | ET 200 PDF manuals