6ES7326-1BK00-0AB0
6ES7326-1BK00-0AB0 Siemens SM 326 24 V DC Fail-Safe Digital Input Module
6ES7326-1BK00-0AB0 is a 24-input, 24 V DC fail-safe SM 326 module in the Siemens SIMATIC S7-300 family, with diagnostic interrupt support. Use the complete order number when selecting a digital input module; channel count alone is insufficient for choosing a spare for an existing safety application.
Supply, connection and dimensions
The module uses a 40-pin front connector and 12-channel isolation groups. Maximum unloaded L+ consumption is 450 mA; maximum 5 V backplane consumption is 100 mA. Typical power loss is 10 W. The four sensor supply outputs have a 400 mA rating. Dimensions are 80 × 125 × 120 mm (W × H × D).
Safety application and CPU compatibility
The manufacturer specifies SIL 3 / EN 954 Category 4 as the highest achievable class with a suitable safety configuration. This does not automatically establish the safety level of the installed machine. Assess the S7-300 CPU, safety software, sensors and field wiring together within the project. Establish the required safety function and acceptance criteria before deciding suitability.
PROFIsafe addressing on the BK00 version
For BK00, the PROFIsafe address is derived from module start address / 8. The STEP 7 HW Config setting must match the rear 10-bit DIP switch; safety mode must also be selected correctly. Section 4.3.2 of the Siemens manual explicitly covers this order number. Do not directly apply the BK01/BK02 addressing procedure to BK00.
Checks when buying a used module
Compare the complete order number, hardware version and firmware information, where available, with the existing project. Inspect the DIP switch, connector pins, housing and signs of thermal stress. Request diagnostic records and safety communication test information alongside channel checks. Confirm separately whether the front connector, covers and connection accessories are included in the delivery.
PDF files and manufacturer reference
Use the S7-300 PDF files section to locate relevant documents. Consult the Siemens product record for the model reference and section 4.3.2 of the Siemens fail-safe module manual for BK00 addressing. The SM 326 technical specifications section in the 2013 manual describes BK02; it must not replace the BK00 data sheet.
Related topics and navigation
S7-300 main page | Digital input modules | Digital output modules | S7-300 CPU modules
Analog modules | Special and function modules | S7-300 PDF files | S7-300 memory cards
Siemens SIMATIC S7 | Siemens S7 PLC range | Used Siemens products | PLCs and accessories
HMI operator panels | PLC and HMI | Second-hand main page | OtomasyonAVM home