6ES7321-1FF81-0AA0

Siemens 6ES7321-1FF81-0AA0 – S7-300 SM 321, 8 AC Inputs, Extended Temperature Range

6ES7321-1FF81-0AA0 is an SM 321 module with 8 digital inputs rated at 120/230 V AC in the Siemens SIMATIC S7-300 family. It is the SIMATIC Outdoor version for extended environmental conditions.

Inputs and isolation: The eight inputs form four groups of two. Electrical isolation is provided between groups and between the inputs and backplane bus. When replacing a digital input module, check each group’s common connection against the existing field wiring.

AC signals and sensor compatibility: Rated input voltage is 120/230 V AC, with a 47–63 Hz frequency range. Contacts and suitable two- or three-wire AC proximity sensors can be used. Maximum permissible off-state current for two-wire sensors is 2 mA. Select sensors according to the electrical limits of the PLC input.

Operating temperature: Siemens specifies SIMATIC Outdoor ambient limits of −25 to +60 °C for horizontal installation and −25 to +40 °C for vertical installation. Assess actual cabinet temperature, mounting orientation and the limits of other station components separately.

Input delay and diagnostics: Input delay is 25 ms maximum for both rising and falling transitions. Each channel has a green status LED; there are no hardware/diagnostic interrupts or module diagnostic functions. For short-pulse applications, consider signal duration together with the CPU scan cycle.

Connections and project compatibility: The module uses a 20-pin front connector. Compare the complete order number, hardware revision, STEP 7 hardware definition, slot and input addresses. Confirm whether the front connector and backplane bus connector are included. Check AC terminal markings and group commons against the manufacturer’s wiring diagram.

Buying a used module: When buying a used module, inspect the label, terminal discoloration, corrosion and repair history. Ask which AC voltage was used to test all eight channels and whether both input transitions were checked. A functional test at room temperature does not establish testing across the extended temperature range; the report should state that coverage separately.

PDF files and manuals: Use the S7-300 files section for wiring diagrams and technical limits. Consult the SM 321; DI 8 × 120/230 VAC chapter in the legacy Module Specifications manual covering 6ES7321-1FF81-0AA0, together with its SIMATIC Outdoor environmental requirements.

Related topics and categories
S7-300 main page | S7-300 digital input modules | S7-300 digital output modules | S7-300 CPU modules
PLCs and modules | DIN rail power supplies | S7-300 files | Second-hand main page | OtomasyonAVM home

Manufacturer references: Siemens – Outdoor module mapping table | Siemens – S7-300 module documentation