6ES7321-1FF01-0AA0

6ES7321-1FF01-0AA0 Siemens SM 321 8-Channel 120/230 V AC Digital Input Module

6ES7321-1FF01-0AA0 is an SM 321 digital input module in the Siemens SIMATIC S7-300 family, providing 8 inputs for 120/230 V AC signals. It transfers status signals from switches, contact circuits and suitable AC proximity sensors to the PLC system. Field wiring uses a 20-pin front connector.

AC input voltage and signal thresholds

The nominal input voltage is 120/230 V AC, with a frequency range of 47–63 Hz. Siemens specifies 0–40 V for signal “0” and 79–264 V for signal “1”. Do not assume a stable logic state for voltages between these ranges. A 24 V DC sensor output does not meet this module’s specified “1” threshold.

Two-channel isolation groups and wiring

The eight inputs form four electrically isolated groups of two. Check group commons and neutral connections against the wiring diagram for this exact model. 6ES7321-1FF10-0AA0 has individually isolated inputs; matching input counts and nominal voltages do not establish identical wiring arrangements. When replacing a module, compare the existing front connector, terminal numbers and field wiring together.

Input delay and sensor selection

Input delay is 25 ms maximum for both “0” to “1” and “1” to “0” transitions and is not parameterizable. For short-pulse applications, consider both the input delay and CPU scan time. Two- and three-wire AC proximity sensors are supported; the permissible quiescent current of a two-wire sensor is 2 mA maximum.

Status indication and used-unit checks

Each input has a green status LED; the module provides no diagnostic functions or interrupts. When selecting a used unit, check the complete order number, connector contacts and signs of thermal stress. Request test information showing that the PLC reads both “0” and “1” states on all eight channels. Confirm separately whether the front connector is included.

PDF files and manufacturer references

General documentation is available in the S7-300 PDF files section. For this model, refer to section 3.17, printed pages 101–103 of the Siemens S7-300 Module Data manual. The Siemens 6ES7321-1FF01-0AA0 data sheet also provides input thresholds, delays and sensor requirements. Compare the complete order number when selecting a replacement.

Related topics and categories

S7-300 main page  |  Special and function modules  |  Analog and special signal modules

S7-300 CPU modules  |  Digital input modules  |  Digital output modules

S7-300 memory cards  |  Siemens S7 PLC range  |  Used Siemens products

HMI operator panels  |  Second-hand main page  |  OtomasyonAVM home

Power supplies  |  DIN rail power supplies