6ES7321-1BH00-0AA0

Siemens 6ES7321-1BH00-0AA0 S7-300 SM 321 Digital Input Module

Siemens 6ES7321-1BH00-0AA0 is an SM 321 module with 16 digital inputs for the Siemens S7-300 family. It is designed for nominal 24 V DC input signals and transfers binary field status information to the PLC program. It can be considered among the digital input modules when replacing an installed unit with this order number or preparing a maintenance spare.

Field signals and wiring checks

Contact devices such as pushbuttons and limit switches, together with compatible inductive sensors and photoelectric sensors, provide status signals for this type of input application. A 24 V rating alone does not establish sensor compatibility: check the output type, common reference connection and module input requirements together.

Compare the front connector wiring, channel numbers and field wire labels with the existing cabinet drawings. Confirm whether the front connector, cover and rear bus connector are included with the actual unit. Use documentation covering the BH00 version when checking input voltage thresholds and delay times.

CPU, addressing and version compatibility

Check the installed S7-300 CPU modules, module slot, input start address and programmed channel assignments. The status of sixteen inputs corresponds to two bytes; obtain the actual addresses from the existing hardware configuration. Compare the complete nameplate code with the STEP 7 hardware entry.

6ES7321-1BH01-0AA0 and 6ES7321-1BH02-0AA0 are different order numbers within the SM 321 family. Replacement assessment should cover wiring, station configuration and manufacturer compatibility information as well as channel count.

Editor’s note: use with ET 200M

The exception table in section 8.5 of the Siemens ET 200M manual lists 6ES7321-1BH00-0AA0 among the modules that do not support module replacement during operation. When assessing its use in ET 200 systems, check the IM 153 interface, bus arrangement and module order number together. An ET 200M station supporting this function does not give the BH00 module the same capability.

Evaluating a used module

Inspect the nameplate, hardware revision, terminal socket, latches and rear connections for corrosion, heat damage and signs of previous repair. Functional assessment should check all 16 inputs individually for transitions between 0 and 1 using a suitable test setup and compare them with the bits read by the PLC. The test scope and results must relate to the actual offered unit.

Provide the complete order number, required quantity and a photograph of the installed module’s nameplate when requesting a quotation. Confirm included accessories, physical condition and any available test record for the specific unit.

PDF files and manufacturer documentation

Visit the S7-300 PDF files section for station documentation and manual links. An input count and addressing example appears in the Siemens PROFINET System Description, 03/2012, Figure 4-17. The ET 200M replacement restriction appears in section 8.5 of manual EWA 4NEB 780 6006-01 04.

Manufacturer references: Siemens system manual (PDF) | Archived Siemens ET 200M manual, p. 8-10.

Related topics and product groups

Siemens S7-300 | digital input modules | digital output modules | analog modules

S7-300 CPU modules | Siemens S7 PLC | PLCs and modules | ET 200 systems

PLC power supplies | sensors | sensor connectors | S7-300 PDF files

used Siemens equipment | used automation equipment | 6ES7321-1BH01-0AA0 | 6ES7321-1BH02-0AA0