6ES7332-5HB01-0AB0

6ES7332-5HB01-0AB0 Siemens SM 332 2-Channel Analog Output Module

6ES7332-5HB01-0AB0 is the two-channel SM 332 analog output module in the Siemens SIMATIC S7-300 family. It provides voltage/current outputs, 11/12-bit resolution and a 20-pin front connector. Check the complete order number, channel count, signal range, isolation arrangement and existing project compatibility when selecting a unit.

Output ranges and application

Voltage: 0–10 V, 1–5 V, ±10 V. Current: 0–20 mA, 4–20 mA, ±20 mA. Select each channel’s output type and range to match the signal accepted by the connected device.

Consider it for transferring a command from the PLC program to a compatible analog-input variable frequency drive, servo drive or process actuator. Before purchasing, establish whether two outputs cover the existing system and identify the reference signal required by each receiver.

Isolation and timing

The outputs are isolated from the backplane bus and load supply, but there is no galvanic isolation between the two output channels. Isochronous operation is not supported. Maximum conversion time is 0.8 ms per channel.

When connecting devices with different reference potentials, assess more than the description “isolated module.” Check whether a common analog reference is suitable for your installation. Conversion time alone also does not define the response time of the complete machine.

Supply, dimensions and load limits

Supply: 24 V DC. Dimensions: 40 × 125 × 117 mm. Voltage-output load: at least 1 kΩ. Current-output load: standard maximum 500 Ω. Assess the panel power supply and receiving input against these conditions.

STEP 7 and used-unit checks

Review channel addresses, output ranges, scaling and CPU STOP behavior in the existing S7-300 CPU project. For a used unit, measure both channels separately at low, middle and high points of the intended range with a suitable load. Also verify the full label code, connector condition and delivery contents.

PDF files and manuals

Use the S7-300 PDF files section for terminal connections, parameters and diagnostic information. Check that the selected document covers order number 6ES7332-5HB01-0AB0.

Related topics and categories

S7-300 main page  |  Special and function modules  |  Analog and special signal modules

S7-300 CPU modules  |  Digital input modules  |  Digital output modules

S7-300 memory cards  |  Siemens S7 PLC range  |  Used Siemens products

HMI operator panels  |  Second-hand main page  |  OtomasyonAVM home


Siemens 6ES7 332-5HB01-0AB0

Siemens 6ES7 332-5HB01-0AB0

Siemens 6ES7332-5HB01-0AB0 is a two-channel SM 332 analog output module for SIMATIC S7-300 systems. ..

188.00USD Ex Tax: 188.00USD

Showing 1 to 1 of 1 (1 Pages)