6ES7332-5HD01-0AB0

Siemens 6ES7332-5HD01-0AB0 – SM 332 Analog Output Module

Siemens 6ES7332-5HD01-0AB0 is an SM 332 module with 4 analog outputs for SIMATIC S7-300 systems. It converts PLC commands into voltage or current signals for compatible analog inputs on drives and process controllers. Key features include 11/12-bit resolution, diagnostics and a 20-pin front connector.

Output signals and technical specifications

Selectable voltage ranges are 0–10 V, 1–5 V and ±10 V; current ranges are 0–20 mA, 4–20 mA and ±20 mA. The module requires a 24 V DC load supply. Conversion time is 0.8 ms per channel. Load resistance must be at least 1 kΩ for voltage outputs and no more than 500 Ω for current outputs. Resolution is 12 bits or 11 bits plus sign, depending on the selected range.

The outputs are isolated from the backplane bus and load supply; there is no galvanic isolation between channels. Applications requiring channel-to-channel isolation should compare other S7-300 analog modules against this requirement. This model does not support isochronous operation.

Configuration and application compatibility

STEP 7 allows the output type and range to be configured separately for each channel. The diagnostic interrupt is configurable. For CPU STOP, available responses include zero current/voltage, holding the last value or applying a configured substitute value. When supplying a drive speed reference, match the PLC output signal and scaling to the drive's analog input settings.

Selecting a used module

Check the complete order number, hardware revision, whether the front connector is included and the test status of all four output channels. Testing should cover several command levels in the required voltage or current range with a suitable load. For additional channels, compare other SM 332 models such as 6ES7332-5HF00-0AB0; channel, connector and project differences must be checked before treating another model as a replacement.

PDF files and technical reference

For wiring diagrams and parameter descriptions, visit the S7-300 PDF files section. Manufacturer reference: Siemens S7-300 Module Data — section 6.14: SM 332, 6ES7332-5HD01-0AB0.

Related topics and product groups

S7-300 analog modules | S7-300 main page | 6ES7332-5HF00-0AB0 | Siemens S7 PLC products

Used Siemens products | S7-300 PDF files | Second-hand main page | OtomasyonAVM home