6ES5 980-0NC11

Siemens 6ES5 980-0NC11 – S5 Rechargeable Backup Battery, 3.6 V / 1.2 Ah

Siemens 6ES5 980-0NC11 is a rechargeable backup battery for SIMATIC S5 equipment. The Siemens product sheet identifies it for ZG 188U and EG 185U. The original rechargeable battery specified in the S5-135U/155U system manual is 3.6 V, 1.2 Ah, nickel-cadmium (Ni-Cd).

Select the battery against the complete power-supply order number. When consulting documentation for 6ES5 955-3LC42, 6ES5 955-3LF42, 6ES5 955-3NC42 or 6ES5 955-3NF42, read the applicable battery and maintenance sections together. Do not assume that every 955 power supply uses the same mounting arrangement.

Distinguishing the original battery from alternatives

A 3.6 V marking alone does not establish suitability. Check chemistry, capacity, connections, polarity and physical dimensions together. Retain suffixes such as 955-3LC14 and 955-3LC41 in the service record; the family name alone is insufficient for selecting a replacement.

Distinguish the rechargeable pack from a primary lithium backup battery. Do not substitute another battery reference such as 6ES5 980-0DA11, or a battery intended for a memory module, merely because the connections appear similar. An alternative with different chemistry or capacity requires separate verification of charging-circuit suitability.

Mounting and connection checks

The manual locates the pack in the right-hand fan subassembly and specifies red positive, black negative. Check the 6ES5 988-3NB41 fan subassembly, rack arrangement and connection hardware together. Look for trapped wiring, loose connections and incorrect seating.

On arrangements fitted with the 6ES5 981-0FA41 filter holder, consider both access and airflow. Refit all parts correctly after inspection and include fan and filter maintenance in the service record.

RB low indication and charging time

If RB low persists, investigate the pack, connections and charging circuit. The manual allows at least 6 minutes before acknowledging the indication with a fully discharged pack, and up to 46 hours for recharging. Battery backup is restricted during charging. Assess MB low separately.

Checks before and after replacement

Before starting, record the installed processor’s complete reference, such as CPU 922 or CPU 928, the program backup and the arrangement of interface modules. Plan the machine stop and isolation with the existing backup condition understood. Installing a new pack should be only one part of protecting the program.

After replacement, check digital inputs, digital outputs and analog modules against the machine’s commissioning procedure. Assess battery condition separately from field power. Establish the cause of a fault before continuing to replace components.

Editor’s Note

Photograph the old pack’s label, wiring and connection orientation before removal. With used Siemens parts, an identical-looking assembly may contain replacement cells or modified wiring.

A voltage reading alone does not establish that the pack is healthy. Open-circuit voltage does not prove capacity. Use an appropriate test arrangement rather than interrupting a running machine’s supply as a battery test.

If the warning remains after replacement, inspect the wiring, contacts and power-supply charging circuit. Replacing the pack repeatedly will not resolve a defective charger.

Do not fit a pack showing leakage, corroded terminals or damaged insulation. Follow the proper replacement and service method without opening the pack or modifying its cells.

Ask for the manufacture or refurbishment date, cell chemistry and capacity-test results. In Siemens S5 maintenance, measured condition and correct matching are more useful than cosmetic appearance.

OtomasyonAVM resources and PDFs

Start with the 6ES5 980-0NC11 product page, the related fan subassembly and the SIMATIC S5 overview. Use the OtomasyonAVM S5 PDF archive to locate relevant documentation. In the English S5-135U/155U system manual, consult printed pages 4-44–4-45 for replacement and diagnostics, 4-53 and 4-56 for specifications, and A-3 for the order reference.

Related topics

+ 955-3LC42 · 955-3LF42 · 955-3NC42 · 955-3NF42 · 988-3NB41

Browse SIMATIC S5

+ SIMATIC S5 · Siemens S5 PLC · S5 racks · Used Siemens overview

Siemens and external references

Siemens S5-135U/155U System Manual — C79000-G8576-C199-07, English · Siemens 6ES5980-0NC11 Data Sheet — English, 28.04.2018