6ES5 550-0DS11

Siemens 6ES5 550-0DS11 – DS 550 Diskette Station

Siemens 6ES5 550-0DS11 is a DS 550 external diskette station for SIMATIC S5. Siemens describes the DS 550 application as diskette storage for data blocks. A single DB or a group of consecutive DBs can be stored under an 11-character file name. When planning recipe or parameter archives, identify the data contents and their role in the application separately.

For an installation using CPU 944, record the complete CPU order number, such as 6ES5 944-7UA11 or 6ES5 944-7UA12. Do not treat 6ES5 944-7UB11 and 6ES5 944-7UB21 as identical merely because both carry the CPU 944 designation. Establish the interface, operating system and communication software from the actual installation.

Data archives and PLC program backups

A diskette containing data blocks does not establish that the complete program and project files for the S5 CPU have also been preserved. Keep the PLC program, symbols, comments and machine parameter files separately. Record which DBs the DS 550 archive contains and which machine version it belongs to.

Keep diskette contents distinct from the application on S5 memory modules. If considering other storage products such as 6ES5 551-3UA11 or 6ES5 581-4LA11, establish the connection, software and file transfer method rather than deciding from the storage function alone.

Communication and application software

In Siemens’ WF 470 connection example, the DS 550 uses the WF 470 X7 connection and corresponding S5 software. Its side-mounted DIL switches are set for that application. Do not transfer those cable and switch settings directly to a different S5 communication arrangement.

Check S5 cables and connectors and interface hardware against the installed connection diagram. If a communication processor such as 6ES5 524-3UA13 CP 524 or 6ES5 525-3UA11 CP 525 is present, include its parameters in the assessment. Replacing the diskette station alone does not establish a working connection.

During PLC software selection, identify the file and transfer functions used by the existing program. For industrial communication acceptance, check command initiation, completion and received data separately. Isolate the drive, diskette, cable and software in stages when investigating transfer errors.

Diskette format and acceptance testing

Siemens’ 1990 WF 470 software description documents 720 K diskette formatting and states that 1.44 MB formatting was unavailable in that software version. This is application-specific information, rather than a universal capacity limit for every DS 550 hardware and software version.

Start by reading the existing archive. Use backup or test media for write checks, then read the file again and compare its contents. Confirm whether the cable and required software are included when purchasing S5 expansion modules and accessories. Use About Siemens S5 PLC for background and retain the installed system’s documentation in the maintenance record.

Editor’s Note

When buying the station as used Siemens equipment, check the label and mechanism first. Request photographs showing the complete order number, connection sockets and both cable ends. An illuminated indicator does not demonstrate successful diskette reading or correct data transfer.

Keep the machine’s last working diskette out of acceptance tests. Preserve a suitable copy or image first. Failure to read it on another computer is not a reason to format it; check the media format and software requirements.

Request separate read, write-to-test-media and read-back checks. Compare the returned contents rather than merely confirming that a file exists. Prefer a demonstration using a connection arrangement suitable for your installation.

Record and photograph the side switch positions before changing them. Avoid trial-and-error adjustments. The WF 470 example does not establish the correct settings for every CPU or intermediate interface.

If the mechanism jams or read errors recur, avoid repeatedly inserting an important archive diskette. Use sound test media to distinguish drive and media faults. Keep the tested CPU, cable, software and results together in a written record for future maintenance.

OtomasyonAVM resources and PDFs

+ Shared SIMATIC S5 PDF archive – S5-115 PDF files. The Siemens documents below cover a DS 550 application example and CPU 944 system context; they do not replace a complete DS 550 hardware data sheet.

Related topics

+ 6ES5 944-7UB11 · 6ES5 944-7UB21 · CP 524 · CP 525 · 6ES5 551-3UA11

Browse SIMATIC S5

+ S5 expansion modules · S5 cables and connectors · Siemens SIMATIC S5 · Used Siemens equipment

Siemens and external references

+ Siemens WF 470 Technical Description – English, 6ZB5 440-0QS02, 1992. Section 4.6.3, printed page 4-74: DS 550 connection application and DB filing.

+ Siemens WF 470 Beschreibung – German, 6ZB5 440-0JF01, 1990. Section 3.2.5.3, printed page 3-51: diskette formatting in that software version.

+ Siemens S5-115U Manual – 6ES5 998-0UF23, English. General reference for CPU 944-7UB11/7UB21 and system interfaces; it does not verify every DS 550 connection setting.