6ES5 788-0LC11

Siemens 6ES5 788-0LC11 SIMATIC S5 Simulation Panel

Siemens 6ES5 788-0LC11 is identified in the SIMATIC S5 range as a 788 simulation panel. Listed among S5 expansion and supporting products, it is a test accessory for workshop arrangements using a suitable controller and connection setup. Establish the test capacity from the complete panel identification, connecting cable and I/O hardware used with it.

Simulation work on an existing Siemens S5 system is intended to examine how the program responds to defined signal conditions in a controlled test. Confirm compatibility with the actual S5 CPU group separately. Without the wiring documentation for the 0LC11 version, channel counts, supply voltage and analog ranges must not be borrowed from another 788 model.

Distinguish between the different 788 products

6ES5 788-7LA11 and 6ES5 788-7LB11 are simulation modules with separate order numbers. 6ES5 788-8MA11 and 6ES5 788-8MK11 are also distinct products. The shared 788 designation does not establish a common connector, channel arrangement or controller compatibility.

Review the specifications for digital inputs, digital outputs and analog modules separately. The number of switches or indicators on another model is not a specification for the 788-0LC11. Where a test uses a combined I/O module, confirm the direction and electrical level of each signal from that module’s documentation.

Check the connections and supply arrangement

Identify the pin assignments of the S5 cables and connectors, then establish which circuits are fed by the power supply. A connector fitting mechanically is only the first check: signal pins, common references and supply connections must match the wiring diagram. Do not apply a trial voltage to an unidentified terminal.

Record the S5 rack and CPU used for the test. Follow the selected panel condition through to the physical input and the address seen by the program. This helps distinguish a wiring problem from an addressing error.

Build a repeatable program test

Select the condition to examine in the ladder diagram or function block diagram, then write down the expected input state and output response. Whatever PLC programming language is used, begin by changing one variable at a time. Changing several controls together makes a connection error harder to locate.

During PLC program testing, check the initial state, normal operation, removal of the condition and restart as separate steps. Back up the existing application before changing a S5 memory module or the CPU program. Apply the basic PLC operating principles when recording the effects of timers, interlocks and retained states.

Inspecting a used panel

Assess the complete order number, physical condition, included cables and actual test results together. Request front and rear photographs, close views of the connectors and details of previous repairs. State whether the panel is working or faulty, and identify functions that have not been tested.

Editor’s note

Start with the label. Seeing 788 on the housing is not enough: confirm 788-0LC11 and trace where its cable goes. A diagram for a different 788 unit can turn a straightforward bench test into a wiring problem.

Try each control individually. If the same setting produces an intermittent result, record that before blaming the PLC program. Mechanical wear and poor contacts can make a good program appear unreliable.

An old cable may look tidy while containing a broken conductor. With power disconnected, check continuity and unintended connections between adjacent pins. On a repaired cable, do not rely on wire colours alone.

A lit indicator is only one observation. Does the selected condition reach the correct PLC address, and does the program respond as expected? Follow the complete test path and record the CPU and module order numbers alongside the result.

Agree exactly what is included before buying a used panel. A missing special cable can leave you with an incomplete test set. Clear label photographs, a cable list and a useful test record are particularly valuable for this accessory.

OtomasyonAVM resources and PDFs

+ 6ES5 788-0LC11 product and information page.

+ Siemens S5 models and S5 expansion products.

+ OtomasyonAVM shared SIMATIC S5 PDF archive. Treat the system manuals separately from the wiring documentation for the exact panel version.

Related topics

+ About Siemens S5 PLC and PLC programming.

+ S5 digital input modules, S5 digital output modules and S5 analog modules.

Browse SIMATIC S5

S5 expansion products  |  SIMATIC S5  |  Siemens S5 PLC  |  Siemens second-hand homepage

Siemens and external references

+ Siemens SIMATIC S5 ST 50 catalogue, 1998, English archive copy. Reference for the simulation product groups and distinctions between 788 modules; printed page 3/55 is blank in the copy accessed.

+ Siemens S5-115U system manual, EWA 4NEB 811 6130-02b, Edition 04, English. General reference for system testing and I/O checks; this is not the dedicated wiring manual for the 788-0LC11.