6ES5 180-3AA11

Siemens SIMATIC S5 6ES5 180-3AA11 · EG 180-3A expansion rack

The 6ES5 180-3AA11 is an S5 expansion rack for SIMATIC S5-130A and S5-150A systems. Siemens lists it as a rugged-profile unit, or Robustbauform. It adds eight module positions to the S5 expansion setup. The CPU in the central unit manages the installed modules.

Eight module positions and a dedicated interface slot

Positions 1–8 accept modules. The module housings for those positions are ordered separately. Position 9 has a type 740 housing for the 312-5 interface card. The similar-looking EG 181-3A has six module positions, with its interface in position 7.

Check the order number, housing type and central unit when selecting digital input, digital output, analog or combined I/O cards. The Siemens drawing on page 2/3 shows that the position immediately to the right of a 444-5 or 454-5 digital output or a 460-5, 461-5 or 462-5 analog input must be left free. The same drawing specifies the ZG 150A for analog inputs and outputs.

312-5 interface and cable selection

Siemens shows a 300-5A on the ZG 130A or ZG 150A side, paired with a 312-5 in the EG 180. For compact units such as the ZG 130W or EG 182-3K, the catalog pairs the 300-5C with the 312-5. Choose the 312-5’s fixed connecting lead to suit the rack position. The 312-5AA13 has a 30 cm lead for mounting above, while the 312-5AA31 has a 95 cm lead for side-by-side mounting.

5 V system supply and chain limits

The EG 180 receives its 5 V operating supply from the compatible central unit’s S5 power supply or through a powered EG 182-3A. Siemens’ centralized example specifies up to four EG 180/181 units, 2 m total connection length and 5 A total current on the connected group’s 5 V rail. In a distributed setup with an EG 182, the compact central side uses a 301-5C and the EG 182 side uses a 310-5. The last 310-5 takes a 6ES5 760-0AA11 terminator.

Editor’s Note

When buying a used rack, request clear photos of the backplane connectors at positions 1–8 and the type 740 housing at position 9. Confirm whether the 312-5 is included, then check its full order number and the condition of its fixed cable and plug. Record the cabinet layout before removal because above-rack and side-by-side mounting use different cable lengths.

Selling a 6ES5 180-3AA11? Send the nameplate photo, quantity, working condition and asking price to otomasyonavm@gmail.com.

PDF archive

Shared SIMATIC S5 PDF archive

Related topics

6ES5 183-3UA12 · 6ES5 183-3UA13 · 6ES5 183-3UA22

Navigation

S5 central and expansion units · SIMATIC S5 · Used Siemens automation · Used automation equipment

Reference

Siemens SIMATIC S5-130 / S5-150 Catalog, ST 53 (German, 1985, May revision E86010-K4653-E100-A3). Exact order number p. 9/1, rack drawing p. 2/3, supply and connection limits p. 2/5, interfaces pp. 2/9 and 9/3.