6ES5 135-3UA11

Siemens 6ES5 135-3UA11 | SIMATIC S5-135U central rack

The 6ES5 135-3UA11 is a 21-slot central rack for the S5-135U in the Siemens SIMATIC S5 range. The standard order includes the fan-cooled power supply. The CPU is a separate item. The fitted CPU runs the STEP 5 program.

This S5 rack houses the backplane, module guides, top retaining rail and cable duct. The power supply and its fans sit below the module area.

955-3LC14 power supply

Siemens pairs the 135-3UA11 with the 6ES5 955-3LC14 supply. The product listing gives 230/115 V AC, while the Siemens manual specifies selectable 230/120 V AC. The 5 V DC system rail is rated at 18 A. Check the supply nameplate and selector position before commissioning.

The manual rates the internal 24 V DC auxiliary output at 0.8 A. With the 15 V add-on module fitted, the combined limit for the 24 V and 15 V outputs is 0.8 A. Match the full order number when comparing S5 power supplies.

The AC-fed 6ES5 135-3UA21 is the 5 V / 40 A version and is listed with the 955-3LF12. The 6ES5 135-3UA41 has a 24 V DC input and 5 V / 10 A output. Check both the rack and power supply nameplates.

CPU, memory and slot assignment

The Siemens manual covers the CPU 921 S processor and CPU 922 R processor separately. Match the full CPU order number and the S5 memory module to the existing project. If a multiprocessor system uses the 923A coordinator, check its assigned position as well.

Use the slot chart in section 1.2.1 for digital input, digital output, analog I/O and communications cards. The manual specifies a 15 V supply add-on for the CP 535 and CP 143. Record each module’s slot and address setting before replacing the rack.

Expansion and used-rack checks

The Siemens example for local expansion with the EG 183U uses an IM 300-3 at the source and an IM 312-3 in the expansion rack. If the system has an EG 185U, compare its fitted interface modules and connecting cables with the existing configuration.

For a used unit, ask for photos of the rack and PSU nameplates and a list of the cards included. Check the condition of the fans, backplane contacts and retaining rail. Back up the STEP 5 program before removing the CPU or memory.

Editor’s Note
The Siemens manual specifies a minimum load of 1 A on the 955-3LC14’s 5 V rail. Ask what load was used for the bench test and confirm that the fans were checked.

Manuals and PDF files

In the Siemens S5-135U manual, Table 1 gives the PSU pairing, section 1.2.1 shows the slot assignments and section 6.1 lists the 955-3LC14 ratings. OtomasyonAVM SIMATIC S5 PDF archive

Related topics

About Siemens S5 PLCs · S5 digital I/O cards · S5 expansion modules

Navigation

S5 CPU and rack directory · SIMATIC S5 range · Used Siemens automation · Used automation equipment

References

Siemens S5-135U CPU 921/922 manual, 6ES5 998-0UL22 (EN, PDF)