6ES5 102-8MA02
Siemens 6ES5 102-8MA02 SIMATIC S5-100U CPU 102
The Siemens 6ES5 102-8MA02 is the CPU 102 central processing unit for the S5-100U in the SIMATIC S5 range. It runs the STEP 5 program and manages the modular I/O bus. It has internal RAM for 2,048 statements, a slot for an EPROM or EEPROM memory submodule and a 24 V DC nominal supply input. The permissible input range is 18–34 V DC.
The CPU reads sensor and control signals through the digital input modules and sends the program results to the digital output modules. When replacing a CPU, record the module order as well as saving the program. The slot layout helps you check the I/O addresses used by the machine.
Memory and STEP 5 operating modes
Internal RAM is rated for 2,048 STEP 5 statements. Siemens lists the S5 memory submodules under separate order numbers. The 6ES5 375-1LA15 EPROM and 6ES5 375-0LC31 EEPROM are examples from the S5-100U accessories list. Check the full number on the fitted submodule and confirm which machine its program belongs to.
Normal mode requires a fitted memory submodule. The CPU then runs a compiled version of the program. In test mode, it scans the STEP 5 program directly and supports the STATUS function. Siemens gives approximate normal/test execution times of 7/70 µs for a binary operation and 40/125 µs for a word operation.
I/O channel limits and bus capacity
The CPU 102 specifications give a maximum of 256 digital channels for inputs and outputs combined and 16 analog channels for inputs and outputs combined. For the actual configuration, use the manual’s data-bit calculation for active channels on the analog modules, the digital modules and any empty slots.
The CPU 102 I/O bus allows 480 data bits in total, of which up to 256 may come from analog modules. In Siemens’ example, twenty eight-channel digital modules and five four-channel analog modules total 480 bits. The analog modules account for 320 bits, so the configuration exceeds the CPU 102’s analog limit.
Use the nameplates to distinguish the 6ES5 700-8MA11 screw-terminal bus unit from the 6ES5 700-8MA21 crimp-terminal bus unit. If the installation uses several tiers, identify the IM 315 or IM 316 interface. On IM 316 installations, record the exact 712-series inter-tier cable and its connection direction.
Power, mounting and related CPU models
The CPU takes 24 V DC at L+ and M. Siemens specifies 1 A current draw from the 24 V supply, an internal 9 V / 1 A rail for the I/O bus and 5.2 V / 0.65 A for the programmer. Check the cabinet’s S5 power supply. The PS 930 is rated at 24 V DC, 1 A, and the PS 931 at 24 V DC, 2 A. Assess the supply against the total load on the circuit.
The CPU fits the 35 mm profile rail in the S5 mounting system. Siemens lists the 6ES5 710-8MA11 as a 483 mm rail. The CPU housing measures approximately 91.5 × 135 × 120 mm and weighs about 0.65 kg.
The 6ES5 102-8MA01 also carries the CPU 102 name. Compare the full order number and hardware revision before choosing a replacement. The manual lists total bus capacities of 256 data bits for CPU 100 and 704 for CPU 103. Check the program and fitted I/O together if the CPU type is changing.
Editor’s note
Photograph both labels. Record the 102-8MA02 suffix on the CPU, the type of memory submodule and any label identifying the machine program.
Back up before using COPY. Loading from a memory submodule can overwrite the program in CPU RAM. Use the programmer to save the existing program and any current data blocks the machine needs.
Check the supply at the CPU terminals. If the CPU fails to power up, check L+ and M, the cabinet supply and the S5 wiring separately. Record the BATTERY OFF/LOW indicator as well. Siemens specifies a 3.4 V, 850 mAh lithium backup battery for this model.
Recheck the slot calculation if a new module causes STOP. Check the order of the modules and the total data bits. Siemens states that exceeding the permitted expansion sets the PEU bit in ISTACK.
Ask for a programmer test on used CPUs. When assessing a used Siemens S5 CPU, ask for evidence of PG communication, a successful memory read and entry into RUN in a suitable test configuration.
OtomasyonAVM resources and PDFs
For the system layout, see About Siemens S5 PLCs. To compare processors, browse the S5 CPU models.
+ OtomasyonAVM S5 manuals and PDF archive
Related topics
+ 6ES5 102-8MA01 CPU 102, 6ES5 100-8MA02 CPU 100 and 6ES5 103-8MA03 CPU 103
+ S5 memory cards and S5 interface modules
Browse the S5 range
Used Siemens S5 · SIMATIC S5 · S5 CPU models
Selling this CPU? Send a nameplate photo, quantity, working or fault condition and asking price to otomasyonavm@gmail.com.
External references
+ Siemens S5-100U system manual (English PDF) · Exact part specifications on page 14-8, I/O data-bit calculations on pages 2-8 and 2-9, and CPU 102 operating modes in section 7.4.1.
+ Siemens 6ES5 102-8MA02 ordering datasheet (English PDF) · Identifies the S5-100U CPU 102 and its 24 V/9 V DC supply arrangement.