6ES5 526-3LA21
Siemens 6ES5 526-3LA21 CP 526 Graphics Expansion Board
The Siemens 6ES5 526-3LA21 is a CP 526 graphics expansion board for S5-115U, S5-135U, S5-150U and S5-155U systems in the SIMATIC S5 family. It adds pixel graphics to a forced-air-cooled color CP 526 basic board. The expansion board draws 2.3 A at 5 V DC ±5%, supports 640 × 396 color CRT graphics at 60 Hz and accepts a memory submodule of up to 128 KB.
On a machine, the board can display temperature, pressure or speed values from a PLC data block as trend curves, bar graphs or enlarged numbers. An operator can watch a furnace temperature trend, for example, while a separate bar changes color when a reading crosses a limit. The pixel graphics and the basic board’s character display appear on the same monitor.
How do the basic board, monitor and keyboard connect?
A 64-pin ribbon cable links the expansion board to the CP 526 basic board. The two boards fasten together as one assembly. The expansion board receives power through its 8-pin ES 902 backplane connector. The color monitor connects to the basic board’s coaxial RGB and sync outputs.
Identify the internal ribbon separately from the front-panel S5 connection cables. The 6ES5 727-2CB00 connects a 982 process keyboard. For MP20/30/40 installations, the 6ES5 736-2CB00 and 6ES5 736-2CC00 are the 10 m and 20 m keyboard cable options, respectively.
What is the difference between 3LA21 and 3LA22?
Siemens lists a maximum memory submodule capacity of 128 KB for 3LA21 and 256 KB for the 6ES5 526-3LA22. When sourcing a spare, check the fitted submodule type and capacity against the graphics project in use.
The front receptacle takes an EPROM or RAM memory submodule containing the graphics application. RAM that relies on battery backup through the backplane can lose its application when the board or submodule is removed. Back up the COM GRAPH project and application memory before removing either.
What should you check on the rack, power supply and cooling?
Use Table 4-1 in the Siemens CP 526 manual for the specific S5 mounting rack. In the S5-115U CR 700-3 layout, the manual shows the expansion board in position 0b, 1b or 2b in the same casing as the basic board. For the CR 700-2LB, the S5-115U system manual specifies the 6ES5 491-0LB11 adapter casing with the CP 526 basic board.
The 2.3 A rating is for the expansion board. Include the basic board and other modules when checking the 5 V load on the rack power supply. The expansion board requires forced-air cooling. If the long rack has a fan assembly, check its label to distinguish supply variants such as the 115/230 V AC 981-0HA11 and 24 V DC 981-0HA21.
How do the CP 526 basic boards differ?
The CP 526-2 3LF11 and CP 526 3LG11 are examples of color basic boards with different cooling arrangements. Check the full basic-board order number and the forced-air rack configuration before pairing a board with this expansion module.
The CP 526 3LA01 and CP 526-2 3LF01 are monochrome basic boards. Siemens specifies a forced-air-cooled color CP 526 basic board and a high-resolution monitor for the 3LA21 graphics application.
Editor’s note
Photograph both labels when sourcing a spare. The expansion board’s 3LA21 suffix and the adjacent basic board’s order number should both be legible.
Before separating the boards, photograph the orientation of the 64-pin ribbon cable and the mounting spacers. Switch off the rack supply before inserting or removing the boards.
Label the basic-board and expansion-board memory submodules separately. Keep those labels with the COM GRAPH backup from the working system.
If text appears but curves or bars are missing, first check that the PLC data block is updating. Then check the graphics application and the ribbon cable between the boards.
After replacement, use a known process value to verify that the trend updates and the bar changes color at its configured limit.
OtomasyonAVM resources and PDFs
See the Siemens SIMATIC S5 PLC overview and the S5 communications and graphics processors section for the family and related boards.
Find rack and system documentation in the SIMATIC S5-115 PDF archive.
Related topics
CP 526 3LA11 color basic board, CP 526 3LA22 graphics expansion board and SIMATIC S5 expansion modules.
Browse the S5 range
S5 communications modules and SIMATIC S5 family.
If you have a board to sell, send a label photo, quantity and working condition to otomasyonavm@gmail.com.
Siemens and external technical references
Siemens SIMATIC S5-115U system manual, CR 700-2LB rack layout (PDF)