6ES7 132-1EH00-0XB0

Siemens main menu › SIMATIC S7 › SIMATIC ET 200

Siemens 6ES7 132-1EH00-0XB0 — ET 200L 16 DO 120 V AC/1 A Electronics Block

6ES7 132-1EH00-0XB0 is an ET 200L electronics block with 16 digital outputs rated at 120 V AC/1 A, part of the Siemens ET 200 distributed I/O family. It controls suitable AC solenoid valves, contactor coils and indicator lights. When selecting this model from the ET 200 digital output range, assess the AC voltage rating, load current and installation conditions together.

Order number: 6ES7132-1EH00-0XB0
Series: SIMATIC ET 200L
Outputs: 16 DO
Rated load voltage: 120 V AC
Rated channel current: 1 A, subject to mounting and temperature limits
Communication: PROFIBUS-DP
Terminal base: TB 16L AC / 6ES7193-1CH20-0XA0

ET 200L block construction and connections

Within the ET 200 system architecture, the electronics block and the terminal base carrying the field wiring are separate components. This ET 200L block includes a PROFIBUS-DP connection. When comparing ET 200 communication options, retain the existing DP network arrangement; do not configure this product as a PROFINET device. Record the ET 200 connection components separately as the electronics block, terminal base and bus connector.

Five checks before selection or replacement

1. Voltage and protection: This is a 120 V AC model, not a 120 V DC or 230 V AC output block. The Siemens manual specifies no internal short-circuit protection. Assess external circuit protection together with the load and installation. When reviewing ET 200 power supply components and the ET 200 power distribution arrangement, distinguish this AC circuit from any 24 V DC circuits in the cabinet.

2. Temperature and mounting orientation: The 1 A per-channel rating does not apply under all conditions. The manual specifies 1 A up to 40 °C and 0.4 A up to 60 °C for horizontal installation; other mounting orientations are limited to 0.4 A up to 40 °C. Check cabinet temperature and actual mounting orientation before calculating loads from a “16 × 1 A” description.

3. Correct terminal base: Verify TB 16L AC, 6ES7193-1CH20-0XA0 for this electronics block. The ET 200 terminal block range includes different bases with the same channel count. Inspect the installed base label, contacts and wire markings. Do not assume ET 200S terminal modules or other TB 16L variants are interchangeable.

4. PROFIBUS and project: Compare the device definition, PROFIBUS address and output addresses in the Siemens S7 hardware project with the installed station. If communication fails, check the bus connection, termination and device supply first. Several inactive outputs do not by themselves establish that all affected channels have failed.

5. Load behaviour when switched off: Siemens specifies a maximum off-state residual current of 2.6 mA. Consider this especially with low-consumption loads. Distinguish an output command from the actual valve or contactor state; where needed, monitor suitable sensor or auxiliary-contact feedback through ET 200 digital input modules.

Distinguishing similar order numbers

6ES7131-1EH00-0XB0 is a 16-channel AC input block. 6ES7132-1JH00-0XB0 is a different model with relay outputs. “1EH00” or “16 channels” alone is not enough to identify a replacement. Review ET 200 special-function and additional modules when exploring other functions, while separately verifying mechanical and electrical compatibility between ET 200L and other ET 200 families.

Editor's note

Some seller descriptions incorrectly state “120 V DC” for this order number. Siemens manuals and catalogues confirm 120 V AC. Do not select a spare from a listing title alone; compare the labels on both the electronics block and terminal base.

Manuals and PDF documentation

On our Siemens ET 200 PDF and user manuals page, consult the system manual for ET 200L, ET 200L-SC and ET 200L-SC IM-SC. EWA 4NEB 780 6009-02c, section 8.7 covers this product's wiring diagram and technical limits. Read the TB 16L AC terminal-base section alongside it.

Related topics and Siemens navigation

Product family: Siemens main menu  |  SIMATIC S7  |  ET 200 family

Station and field devices: Digital output modules  |  Terminal blocks  |  PROFIBUS and PROFINET

Technical resources: About ET 200  |  Power supply modules  |  ET 200 PDF manuals