6ES7 953-8LP11-0AA0
6ES7 953-8LP11-0AA0 – Siemens SIMATIC S7 Micro Memory Card, 8 MB
Series: SIMATIC S7
Category: 8 MB Micro Memory Card (MMC), 3.3 V NFlash
Function and application
6ES7 953-8LP11-0AA0 is a Siemens 8 MB SIMATIC Micro Memory Card. The manufacturer identifies S7-300, C7 and ET 200S IM151 CPU applications. Listed within the S7-300 memory card family, it stores the program and configuration in a suitable controller.
Do not select the card solely by the S7-300 or ET 200 family name. Compare the intended CPU’s complete order number, hardware version and firmware with its own documentation. The ET 200 designation does not mean that every interface module accepts the same card.
What does 8 MB of load memory provide?
In the relevant MMC-based S7-300 CPU modules, the card provides load memory for program blocks and system data. The work memory used for program execution is built into the CPU. Installing an 8 MB card therefore does not give the PLC 8 MB of work memory or increase its processing speed.
If a program cannot be downloaded, identify which memory area is insufficient. Free space on the card alone does not establish that the program fits into the CPU’s work memory. Check the card capacity and the CPU’s program limits separately when selecting a replacement.
Understanding the 3.3 V NFlash specification
The Siemens description 3.3 V NFlash identifies the card’s memory technology and electrical specification. It is not an input to be wired directly to a cabinet power supply. The card operates in a suitable device’s MMC slot; an ordinary SD or microSD card is not an equivalent simply because its capacity matches.
Programming and formatting
Do not format the card using Windows or third-party devices; this can damage its SIMATIC-specific internal structure. Use the SIMATIC reading and writing methods specified in the CPU manual.
On an IM151-7 CPU, a normal memory reset is not card formatting. Performing MRES does not establish that the card is empty. Verify your backup first.
Replacement and commissioning
On an IM151-7 CPU, do not remove the card in RUN or during writing. Follow the device manual’s conditions for replacement in STOP or with power off.
Before replacement, record the CPU identification, card order number and project version. Inspect the slot, contact surfaces and card body for damage. Allow time in the commissioning plan to verify the program and test the machine under controlled conditions.
Editor’s Note
With a used MMC, first establish which machine the stored program belongs to. Matching order numbers do not mean matching programs. Verify the contents before switching to RUN. Specify whether you need a blank card or a card prepared with a particular project; a label photograph alone does not demonstrate that the card is readable or contains the correct program.
Manuals and PDF documents
Visit Siemens ET 200 manuals and PDF documents for related documentation. Technical sources: the model-specific Siemens product record; IM151-7 CPU, A5E00058783-05, sections 4 and 7.4; S7-300 CPU 31xC and CPU 31x: Specifications, A5E00105475-08, section 4.
Related topics
About Siemens ET 200 · ET 200 PROFIBUS and PROFINET · What is PROFIBUS? · What is PROFINET?
S7-300 digital input modules · S7-300 digital output modules · S7-300 analog modules
Navigation
Home · Siemens · Siemens S7 PLC · SIMATIC S7 · PLCs and accessories · PLC and HMI systems