Siemens Spindle / 1PH7
Siemens Spindle / 1PH7 covers Siemens products through main-motor power-speed range, cooling, encoder and motor-module relationship. The period references are 12/2006.
Siemens Spindle / 1PH7 supports maintenance, machine retrofit and new-axis selection. The drive forms one system with the motor winding, encoder protocol, command interface, brake and cable terminations; in a spindle and main-motor architecture, servo units, the common power supply and spindle units have separate duties.
For Siemens Spindle / 1PH7, 1FK7 Synchronmotoren — Projektierungshandbuch PFK7S identifies the manual family used to locate generation and combination tables.
Siemens Spindle / 1PH7 uses the electrical, mechanical and interface distinctions stated for this family as its connection profile. The engineering tool must match the drive generation and firmware.
When building a Siemens Spindle / 1PH7 axis, consider Siemens Spindle / 1PH2, Siemens Spindle / 1PH4 and Siemens Spindle / 1PM4 within the same generation and supply class.
For Siemens Spindle / 1PH7 command, feedback and maintenance, Siemens Spindle / 1PM6, Siemens Spindle / 1FE1 and Siemens Spindle / 2SP1 complete the system through matching ports, cable ends and software support.
Siemens Spindle / 1PH7 family and model distinctions
1PH7: Spindle / 1PH7 Ana motor / spindle ailesi. Key distinctions include spindle axis. The applicable combination tables are identified under 1PH2/4/7, 1PM4/6, 1FE1, 2SP1.
A shared enclosure or series name is insufficient when replacing Siemens Spindle / 1PH7. Compare the complete nameplate sequence, supply voltage, capacity, motor-encoder generation, brake, connector and parameter-transfer path together.