Siemens Spindle / 1PH2

Siemens Spindle / 1PH2 covers Siemens products through main-motor power-speed range, cooling, encoder and motor-module relationship. The period references are 12/2006.

Siemens Spindle / 1PH2 supports maintenance, machine retrofit and new-axis selection. The drive forms one system with the motor winding, encoder protocol, command interface, brake and cable terminations; in a spindle and main-motor architecture, servo units, the common power supply and spindle units have separate duties.

For Siemens Spindle / 1PH2, 1FK7 Synchronmotoren — Projektierungshandbuch PFK7S identifies the manual family used to locate generation and combination tables.

Siemens Spindle / 1PH2 uses the electrical, mechanical and interface distinctions stated for this family as its connection profile. The engineering tool must match the drive generation and firmware.

When building a Siemens Spindle / 1PH2 axis, consider Siemens Spindle / 1PH4, Siemens Spindle / 1PH7 and Siemens Spindle / 1PM4 within the same generation and supply class.

For Siemens Spindle / 1PH2 command, feedback and maintenance, Siemens Spindle / 1PM6, Siemens Spindle / 1FE1 and Siemens Spindle / 2SP1 complete the system through matching ports, cable ends and software support.

Siemens Spindle / 1PH2 family and model distinctions

1PH2: Spindle / 1PH2 Ana motor / spindle ailesi. Key distinctions include spindle axis. The applicable combination tables are identified under 1PH2/4/7, 1PM4/6, 1FE1, 2SP1.

A shared enclosure or series name is insufficient when replacing Siemens Spindle / 1PH2. Compare the complete nameplate sequence, supply voltage, capacity, motor-encoder generation, brake, connector and parameter-transfer path together.