6EW1000-7AA

Siemens 6EW1000-7AA SIMATIC S5 Lithium Backup Battery — 3.6 V / 5.2 Ah, Size C

Siemens 6EW1000-7AA is a lithium memory-backup battery for SIMATIC S5. The Siemens datasheet identifies 3.6 V, 5.2 Ah, size C and SNR. 11111, and lists the S5-110S, S5-115U, S5-135U and S5-150U families. It is a spare part for the appropriate backup arrangement in SIMATIC S5 equipment within older Siemens automation installations.

This battery is not a cabinet supply providing the equipment’s normal operating power. In a compatible S5 arrangement, it supports memory retention when the main supply is absent. When selecting a lithium battery, match voltage, chemistry, connection style and the exact CPU/power-supply spare-part requirement, rather than appearance alone.

Meaning of 3.6 V and 5.2 Ah

3.6 V is the nominal voltage. 5.2 Ah = 5200 mAh describes capacity, not an allowable continuous output current. Capacity alone does not establish service life in years. Actual backup demand, storage history, temperature and ageing also matter; no fixed replacement interval is asserted here for this complete order number.

Product type and catalogue location

Although it appears in our Siemens 6EV / 6EW model directory and SITOP navigation group, 6EW1000-7AA is a memory-backup battery. It should not be assessed like a power supply with adjustable output voltage, a load-current rating or a mains input. Size C alone does not establish compatibility with another cell.

Preserving the program during replacement

Retention of RAM contents depends on the backup arrangement of the actual S5 hardware. Before removing the battery, obtain a readable backup of the user program and required machine data. Removing backup while main power is also absent can cause data loss. Follow the replacement power-state and operating sequence specified for the installed CPU and power supply.

The presence of an EPROM does not mean every item of working data is stored there. Assess the roles of the S5 memory module, CPU memory and retentive data for the installed system. Verify that any backup belongs to the actual machine; do not load an unidentified program merely to make the CPU run.

Chemistry and mechanical compatibility

Different battery types can look alike without being interchangeable. Do not treat this cell as a NiCd accumulator or lithium-ion rechargeable battery; do not attempt to recharge it. Compare the complete order number, polarity, cell connections and holder arrangement. Packaging dimensions are not cell dimensions; no undocumented terminal or physical dimensions are added here.

Measurement and fault checks

On a removed cell that is no longer supporting memory retention, a multimeter in DC-voltage mode can check polarity and open-circuit voltage. A near-nominal reading does not prove remaining capacity. Never connect an ammeter directly across the battery terminals, as this creates a short circuit. Measurements on an installed battery must follow the host equipment’s service procedure.

Do not connect the high-current resistor loads used for power-supply testing to this battery. If a warning persists with a new compatible cell, investigate polarity, holder contacts, connection continuity and the equipment’s battery-monitoring circuit. A damaged battery holder or connector can be a separate fault. Do not open, puncture or solder directly onto the cell casing.

During S5 maintenance, record the replacement date, new cell identification and warning status. When checking memory retention, do not interrupt mains power experimentally before verifying the backup. Use replacement instructions for the actual CPU and supply module rather than relying on a general family name.

Editor’s Note

The machine’s program may depend on this small cell. Back up the working system first, check that the file is readable and identify the machine it belongs to. Removing the battery and only then checking whether the program remains is an avoidable risk.

Do not apply a power-supply load test here. This battery is not a 24 V supply. An open-circuit reading near 3.6 V is not a complete health assessment. Drawing a high current merely to test it can consume or damage the cell.

Replace the cell correctly rather than attempting a repair. Do not recharge it, open its casing or solder directly onto it. For a connection problem, use an appropriate holder or a correctly prepared replacement assembly while preserving chemistry and polarity.

A persistent warning deserves checks beyond the new cell. Inspect polarity, holder contact and connection continuity, then assess the host supply’s monitoring circuit and documented warning conditions. Repeated battery replacement is not a diagnosis.

The replacement power state depends on the actual hardware. Do not apply one removal sequence to every S5 system. Follow the CPU and power-supply procedure. Any required energised work needs qualified personnel and suitable servicing conditions. Do not test by interrupting mains power before verifying the backup.

Ask about manufacture and storage history for old stock. Sealed packaging does not prove recent manufacture. Obtain identification and supply history, and record the installation date. A battery removed from a used PLC with an unknown history should not be treated as a fresh replacement.

OtomasyonAVM Resources and PDFs

See our SIMATIC S5 main page and Siemens S5 guide for system information.

Siemens SITOP files is the common document page for this 6EW project.

Siemens 6EW1000-7AA — English manufacturer datasheet (20 January 2020, 1 page, approximately 81.1 KiB). Identifies the complete order number, 3.6 V / 5.2 Ah rating, size C, SNR. 11111 and the listed S5 families.

Siemens 6EW1000-7AA — German manufacturer datasheet (28 May 2020, 1 page, approximately 86.6 KiB). A separately dated German datasheet with the same basic product identification. These short datasheets do not replace the CPU-specific battery-change instructions.

Related Topics

Related background includes lithium batteries, RAM, EPROM and memory data loss.

Browse Siemens S5 and 6EW Parts

+ Siemens SIMATIC S5

+ Siemens 6EV / 6EW models

+ Siemens second-hand catalogue

+ Battery types

Siemens and External References

Siemens SiePortal — 6EW1000-7AA — manufacturer product record.

Siemens 6EW1000-7AA — English datasheet hosted by Sminor

Siemens 6EW1000-7AA — German datasheet hosted by SPS-Service