Siemens SIMOTION D4x5-2

Siemens SIMOTION D4x5-2 covers Siemens products through axis coordination, PROFINET/PROFIBUS connectivity, firmware and engineering software. The period references are 01/2015.

Siemens SIMOTION D4x5-2 supports maintenance, machine retrofit and new-axis selection. The drive forms one system with the motor winding, encoder protocol, command interface, brake and cable terminations.

For Siemens SIMOTION D4x5-2, SIMOTION D4x5-2 Commissioning and Hardware Installation identifies the manual family used to locate generation and combination tables.

Siemens SIMOTION D4x5-2 uses the electrical, mechanical and interface distinctions stated for this family as its connection profile. Commissioning and service use SIMOTION SCOUT.

When building a Siemens SIMOTION D4x5-2 axis, consider motion-control systems, servo-drive families and power and supply modules within the same generation and supply class.

For Siemens SIMOTION D4x5-2 command, feedback and maintenance, servo control and accessories, compatible servomotors and Siemens Servo Files complete the system through matching ports, cable ends and software support.

Siemens SIMOTION D4x5-2 family and model distinctions

D425-2 DP, D425-2 DP/PN, D435-2 DP, D435-2 DP/PN, D445-2 DP/PN, D455-2 DP/PN: Siemens SIMOTION D4x5-2. Key distinctions include the electrical, mechanical and interface distinctions stated for this family. Confirm wiring, feedback and system compatibility against the complete catalog number.

CX32-2, CBE30-2: Siemens SIMOTION D4x5-2. Key distinctions include the electrical, mechanical and interface distinctions stated for this family. Confirm wiring, feedback and system compatibility against the complete catalog number.

A shared enclosure or series name is insufficient when replacing Siemens SIMOTION D4x5-2. Compare the complete nameplate sequence, supply voltage, capacity, motor-encoder generation, brake, connector and parameter-transfer path together.