6ES5 741-0AB31
Siemens 6ES5 741-0AB31 – S5 Module Housing with 43-Pole Terminal Strip
Siemens 6ES5 741-0AB31 is a 741 module housing for I/O cards in the S5-130A/S5-150A Robust construction of the SIMATIC S5 family. Its defining features are a 43-pole double-pin terminal strip, 2.4 × 0.8 mm terminals and a body without a heatsink recess. In a SIMATIC S5 system, assess the card’s mechanical installation and field connections together.
Replacing an old I/O card calls for more than inspecting the electronics. A damaged guide, bent terminal or loose fixing in the housing can also create operating problems. Include the complete housing order number in the spares record when reviewing S5 auxiliary components and special module arrangements.
43-pole connection arrangement
The pole count identifies connection positions. Signal type and channel count depend on the installed card. When inspecting S5 cables and connection parts, check terminal dimensions, contact condition and numbering. Identify each signal from the exact I/O module wiring diagram before assigning voltage or function to a terminal.
If one termination feels looser than the others, inspect the mating contact as well as the cable. Photograph discolouration, corrosion or mechanical damage and relate each finding to the affected field circuit.
Card families and mechanical compatibility
The Siemens selection matrix marks the 420, 430, 433, 440, 450, 457 and 465 I/O families in the 0AB31 column. When selecting digital inputs, digital outputs or analog modules, check the Robust construction and full card order number alongside the family designation.
For older cards such as 6ES5 430-6AA11 or 6ES5 450-6AA12, review mechanical format, connection count and wiring together. A similar family number is not sufficient evidence that different housing arrangements will fit.
Housing, rack and expansion unit
6ES5 740-0AA11 is the 740 housing without a terminal strip; 741-0AB31 is specified with the 43-pole strip. Track the S5 rack and the individual module housing as separate maintenance items.
When recording the installation, include the expansion-unit order number, for example 181-3AA11 or 182-3AA21. Compare mounting surfaces, fixing points and clearance to adjacent parts before fitting a replacement housing. Photographs of the removed and replacement parts taken from the same angle are useful here.
The catalog treats Robust and compact constructions separately. If the installation uses S5-130W 6ES5 130-3WE63 or a 182-3KH61 compact expansion unit, verify the housing arrangement afresh. An S5 marking or a shared cabinet location does not establish mechanical compatibility.
Connection checks and maintenance records
When sourcing a housing for an interface module or I/O card, identify the installed card first. A category location within the S5 module catalog does not establish mounting suitability. Match terminal numbering, body format and the manufacturer’s documentation to the actual part.
Record cable numbers before replacement and inspect the contacts with power isolated. Afterwards, verify the relevant field signals under controlled conditions. If a fault recurs when a cable is mechanically stressed, investigate the physical connection as well as the program.
Editor’s Note
Start with a clear view of the 0AB31 label and the 43-pole strip. Another 741 housing may look similar while having a different arrangement. If the card carries a heatsink, settle the clearance question before buying; do not cut the available housing simply to make it fit.
On a used housing, pay particular attention to the terminals. Bent contacts, corrosion, looseness or burn marks deserve more than a quick cleaning. Check contact retention and the mating surface; a poor connection can send you chasing an apparent electronics fault.
Stop if the card will not seat freely. A guide may be distorted, a contact misaligned or the housing incorrect. Forcing the card can damage its edge and connections. Someone familiar with SIMATIC S5 construction can help resolve the mechanical match before damage occurs.
For an intermittent signal, record the affected channel and follow its cable, contact and card input in sequence. Random card replacement often prolongs the investigation. A consistent check along one circuit is easier to verify and document.
Ask for clear front, rear and terminal-strip photographs before buying. Check for missing contacts or fixing parts. With used Siemens equipment, a useful condition report identifies terminal condition and the card previously installed, rather than simply calling the housing good.
OtomasyonAVM resources and PDFs
Start with the SIMATIC S5 overview, auxiliary components and rack group. Use the OtomasyonAVM S5 PDF archive to locate documents. The German Siemens ST 53 catalog, 1985, provides the housing selection matrix on printed page 2/14 and the exact order number on 9/1.
Related topics
+ 6ES5 740-0AA11 housing · 181-3AA11 expansion unit · 182-3AA21 expansion unit · S5 connection parts
Browse SIMATIC S5
+ S5 auxiliary components · S5 racks · SIMATIC S5 · Siemens S5 PLC · Second-hand Siemens overview
Siemens and external references
+ Siemens ST 53 – S5-130/S5-150, 1985, German — printed page 2/14: Robust 741 housing selection; 9/1: exact 741-0AB31 order number, 43 poles, double-pin terminals and heatsink-recess distinction. The link leads to a third-party archive copy of the Siemens publication.