6ES5 301-5AA12

Siemens 6ES5 301-5AA12 – SIMATIC S5 IM 301 Expansion Interface Module

6ES5 301-5AA12 is an IM 301 interface module connecting a central unit to expansion units in legacy Siemens SIMATIC S5 installations. Within the S5 interface module range, its complete code appears as EG-AS 301 in Siemens’ S5-150S hardware-placement tables.

The IM 301-5 family provides a distributed connection up to 200 metres in total using 721 cable, alongside connections to nearby expansion units. The Robust distributed arrangement uses an IM 310, 6ES5 310-5AA12, at the remote end. The 6ES5 310-3AB11 is a mechanically different IM 310 version; match the rack type as well.

Distributed connection versus local expansion

For the distributed connection using 721-series S5 cables, the 200 m limit covers the entire run from the central unit to the last expansion unit. Record cable codes such as 6ES5 721-0BB60 and 6ES5 721-0BC00 together with the complete run.

Nearby expansion units use the IM 312-5 family. Siemens’ Robust configuration example specifies a maximum total length of 2 m for this local connection. The local expansion’s supply arrangement does not mean a rack 200 m away receives power through the same cable.

Power supply and rack checks

The EG 182 in the Robust distributed arrangement has its own power supply; power for nearby EG 180/181 units belongs to that local arrangement. Record the existing S5 rack’s label, supply connections and installed interfaces before replacement.

Review the addresses and supply requirements of the installed digital input, digital output and analog modules together. A connector fitting physically does not establish that the complete module arrangement and addressing are suitable.

Line termination

Siemens’ ST 53 catalog shows a 6ES5 760-0AA11 terminator at the last expansion-unit interface in the older Robust IM 310-5 arrangement. Match the terminator to the exact IM 310 version and its connection diagram.

Distinguishing 5AA12, 5AA13 and 5CA12

6ES5 301-5AA12 and 6ES5 301-5AA13 are different order codes. The 6ES5 301-5CA12 is a separate mechanical option for compact central units and Robust expansion arrangements. Sharing the IM 301 designation does not establish direct interchangeability.

The IM 300, 6ES5 300-5AA12, serves centralized, short-distance expansion. If the existing SIMATIC S5 installation also uses a distributed link, mechanical similarity alone is insufficient for selecting it in place of an IM 301.

Used-module selection and functional testing

When inspecting a used interface module, verify the complete 301-5AA12 code, mechanical construction, connectors and repair history. Test the local and distributed arrangements actually used, and include grounding and cable shielding in the inspection.

Editor’s note

Read the suffix as carefully as the family name. IM 301 may be familiar, but this board is a 5AA12. Before using a 5AA13 or 5CA12 drawing, compare the mechanics and connection arrangement.

Check the remote rack’s supply separately. A reference to expansion without its own supply should not be extended to the entire installation. Follow the actual cabinet wiring to distinguish nearby units from the remote EG 182.

Keep the two distance limits separate. The local expansion length and distributed-run limit describe different connections. Trace the cables and record where each connection leads before making changes.

Give the terminator proper attention. A sound interface can still have connection problems with an incorrect or missing terminator. Read the last IM 310’s code and verify its plug against the correct drawing.

Test the arrangement the board will actually serve. Include the local and distributed connections in use, rather than checking power alone. Recording the cable, partner module and rack saves time at the next maintenance visit.

OtomasyonAVM resources and PDFs

+ Shared SIMATIC S5 manuals and PDF archive

+ S5 interface modules and model pages

Related topics

+ IM 310-5 distributed expansion interface

+ IM 312-5 local expansion interfaces

+ 6ES5 301-5AA13 model page

Browse SIMATIC S5

+ Back to S5 interface modules

+ SIMATIC S5 system pages

+ Siemens S5 PLC main page

+ Used Siemens products and models

Siemens and external references

+ Siemens S5-150S, C79000-B8500-C246-3 – hardware-placement table with exact 301-5AA12 code (German)

+ Siemens ST 53, 1985 – Robust local/distributed expansion and power arrangements, 2/5; ordering table PDF 121 (German)

+ Siemens S5-135U/155U – IM 301/IM 310 family connection principles; later versions (English)