6ES5 926-3SA12
Siemens 6ES5 926-3SA12 – CPU 926 Central Processor Board for S5-150S/150U
Siemens 6ES5 926-3SA12 is a CPU 926 board for S5-150S and S5-150U central controllers in the SIMATIC S5 family. Assess this S5 processor module as the 926S component of a central processor assembly comprising several boards. Its front panel provides operating, stop and startup controls; programming access uses the system’s separate PG interface.
The S5-150U manual shows the central processor assembly with 924S, 925S, 926S and 927S boards. Record the installed numbers of the CPU 924, CPU 925 and CPU 927 boards as well. Do not treat one 926 board as a standalone controller replacing the entire processor assembly and user memory.
Mounting position and documentation scope
In the documented S5 rack arrangement, slot 51 is assigned to 926S. This is the S5-150U family layout; compare it with the actual chassis markings and installed revision. The older manual linked below lists 3SA11 in its spare-parts table. Do not transfer every numerical specification from that edition automatically to 3SA12.
Memory and power supply checks
The S5-150U manual specifies a 340 or 350 memory board for user memory. Inspect the memory hardware number and fitted submodules separately. Assess the S5 power supply, fans and other system boards together. Figures for total processor-assembly current or system memory must not be presented as specifications of the CPU 926 board alone.
PG connection through a separate AS 511
The manual’s programming connection uses the 6ES5 511-5AA12 AS 511, specified with a 20 mA current loop and 9600 baud. These are ratings of the PG interface. Select the programming cable for the installed AS board and programmer model, rather than assuming a programming port on CPU 926 itself.
STEP 5 project and communications records
Keep current data blocks, memory configuration and software details with the STEP 5 program. List the station’s communications module numbers as well. Finding a program file is only part of a replacement job: compare it with the last working machine application before relying on it.
BETRIEB, STOP and NEUSTART indicators
The 926S family description identifies green BETRIEB for cyclic program execution, red STOP for the stopped state and yellow NEUSTART ERFORDERLICH for a required Neustart. Record these indications before intervention during S5 fault investigation. Neustart and Wiederanlauf are different startup operations. Assess retained data and machine conditions before operating the controls.
Distinguishing similar 926 order numbers
6ES5 926-3SA11, 6ES5 926-3KA12 and 6ES5 926-5AA12 are separate order numbers. A shared 926 designation does not establish interchangeability. Compare suffix, revision, chassis and the accompanying processor boards rather than relying on a supplier’s generic product name.
Editor’s Note
When buying a used Siemens 926, obtain a clear view of the 3SA12 suffix and revision label. A photograph showing only 926 is insufficient. Inspect both sides of the board and its connectors.
A board on a workbench is not a complete S5-150 processor test. The correct chassis, accompanying central boards and memory arrangement are required. Record exactly which hardware was used for the test.
If PG access fails, check AS 511 and the cable first. Looking for a direct CPU programming connection while overlooking the separate interface wastes diagnostic time. Confirm that the adapter suits this arrangement.
Do not change jumpers to match an unrelated photograph. The 926 family documentation includes settings affecting test-function/BASP behaviour and timed interrupts. Record existing jumper positions first and use the correct documentation for any change.
A yellow Neustart indication is not a reason to try every control in sequence. Check the backup, battery condition and machine stop conditions first. Record indicators, PG access and system operation separately; a lit LED alone is not a completed functional test.
OtomasyonAVM resources and PDFs
+ SIMATIC S5 CPU models · S5 memory modules · Shared SIMATIC S5 PDF archive – S5-115 PDF files
Related topics
+ 6ES5 926-3SA11 · 6ES5 926-3KA12 · 6ES5 926-5AA12 · 6ES5 511-5AA12 PG interface
Browse SIMATIC S5
+ Siemens SIMATIC S5 · S5 CPU models · S5 interface modules · S5 racks and chassis · Used Siemens equipment
Siemens and external references
+ Siemens 6ES5926-3SA12 data sheet – 14 February 2020 (English). Confirms the exact order number as CPU 926 for S5-150S/150U. Externally archived copy of the Siemens document.
+ Siemens AG S5-150U Handbuch – 6ES5 998-0AL11, Ausgabe 11 (German). Central-controller section: §1.2 board arrangement, §2.6 AS 511 connection, §3.2.2 926 controls and §3.3 jumpers. Family documentation; its older spare-parts list includes 926-3SA11.