2 Wire AC (220-24v) inductive sensors

Hi there,
Here are our 2-wire sensors that can work with AC 220V and between 24V:
As you may know, 2-wire sensors operate by being connected in series with the circuit. In this case, it's important to note the load that will be connected to the output of the sensor (relay, contactor, or control devices), as it's crucial for the operation.
Please note: The sensors listed in this section are compatible with controlling relays and contactors. However, they may have difficulty operating with devices with low input impedance, such as analog time relays. Please keep this in mind when placing an order. Basically, 2-wire sensors require a separate supply voltage (the source voltage is fed to the target device).
For more detailed information about 2-wire sensors, click here. Please note that the sensor models listed in this section are not suitable for direct use as a PLC or pulse source, as they are AC-powered.
We'd like to remind you that, just like all the products on our website, our inductive sensors are designed for professional purposes in the industrial automation sector. They can operate in the same environment as frequency inverters, power supplies, and induction motors, which may cause potential electrical interference. (Please do not confuse them with cheaper series sensors.)
Dear visitors, like all the products on our website, our inductive sensors are devices produced for professional purposes aimed at the industrial automation sector. They have galvanic isolation and high switching speed, making them able to work in the same environment as possible electrical parazite generating devices such as frequency inverters, power sources, and induction motors. (Do not confuse them with economic series sensors)
+ Standart 3 wire DC inductive Sensors
+ All industrial sensor models
+ PLC for sensor -2 Telli M12 İndüktif sensör NC -220V
M12M-CD2TD-2KH is an inductive proximity sensor. It is used for non-contact detection of metal targe..
50.00USD Ex Tax: 50.00USD