(for All VFD)

The Analog 10 kilo ohm potentiometer is a potentiometer with a 22mm diameter frame, which is suitable for use in speed control devices. The main body of the potentiometer is 22mm in diameter and has a series of pins on it, which can be connected in different ways depending on the intended use of the potentiometer.

The nominal value of the potentiometer is 10 kilo ohms, meaning that this potentiometer has a resistance value of 10 kilo ohms from edge to edge. The output of the potentiometer is adjusted through the variability of a resistance value, as is common in the use of potentiometers. Therefore, the output of the potentiometer can be changed by turning the potentiometer, which allows for its use in various applications.

This M22 potentiometer model is compatible with all speed control devices (VFD).

A potentiometer is a three-terminal component that comes in analog and digital varieties and serves as an adjustable voltage divider. When two terminals are used, it serves as a variable resistor or rheostat. The potentiometer can be used for a wide range of things, including joystick position sensors and tone or volume controls in audio systems.

An analog potentiometer shows a mechanical or analog potentiometer. It comprises a sliding contact resistive element that may be manually turned with the hand. Three terminals are present, and there is a resistive element between the two terminals as illustrated. The resistive element and wiper are connected at different positions in the third one. The wiper is manually moved by hand in this kind of pot. Mechanical potentiometers are another name for analog potentiometers.

+ All potentiometer models >

+ Electronic (digital) potentiometers >

+ Analog signal meters >

+ Speed control devices (VFD) >