POD UG40 — UG400 series
POD UG400 models
UG400 groups older Hakko/Fuji operator displays. T, S and L0 suffixes must be retained in the full model code.
Codes and technical differences
Hakko’s cross-reference associates V4T with UG400H-T, V4C with UG400H-S and V4W with UG400H-L. This naming map does not prove every cable and project revision compatible.
Before replacement
Record the rear label, working screen project, supply, communication ports and panel cut-out. A suggested newer generation still requires project conversion and a cable check.
POD UG40 leads to other parts of the same generation. To distinguish nearby codes, see V4 — V4T / V4C / V4B / V4W / V4H / V4SC / V4SB / V4SW. HMI technical documents helps locate the manual for the exact model code.
Fuji operator panels covers the other families. To edit the screen project, see HMI software.