POD UG40
POD UG40 series
UG40 is an older POD operator-panel generation. UG400H, UG340H and UG440H appearing together does not make them the same display or cable.
Codes and technical differences
Hakko separately lists March 2008 for UG400H-T/S/L0 and September 2020 for UG340H and UG440H production end.
Before replacement
Record the rear label, working screen project, supply, communication ports and panel cut-out. A suggested newer generation still requires project conversion and a cable check.
Fuji HMI / MONITOUCH leads to other parts of the same generation. To distinguish nearby codes, see POD UG40 — UG400 series. HMI technical documents helps locate the manual for the exact model code.
Fuji operator panels covers the other families. To edit the screen project, see HMI software.