MICREX-SX SPB
MICREX-SX SPB: a block PLC with two programming modes
MICREX-SX SPB is a compact Fuji Electric block PLC family. It reads machine inputs and controls outputs, but the I/O count is only part of the story. The hardware family can work in N mode or SX mode, with different programming arrangements. Check the exact hardware and I/O variant on the SPB basic-unit page.
N mode and SX mode are not the same project
Fuji lists ladder and mnemonic programming for N mode, with 4K steps on 20/30-point basic units and 8K steps on 40/60-point units. SX mode supports IEC 61131-3 languages IL, ST, LD, FBD and SFC. Their instructions, project files and connection settings must not be treated as identical. Fuji quotes a contact-instruction time starting at 0.44 microseconds for SX mode. This is not the scan time of an entire application.
Power and field wiring
SPB basic units have 100–240 V AC or 24 V DC supply variants. Inputs are in the 24 V DC class, while outputs can be relay or transistor type. A relay switching load and a transistor pulse-output duty are different applications. Read power, input and output terminals from the complete installed model code. High-speed inputs or pulse output also depend on specific terminal positions and output type.
Find engineering tools in Fuji PLC software and manual titles in Fuji PLC CPU documents. For a larger modular design compare MICREX-SX SPH; for another compact family compare MICREX-SX SPF. Expansion and communication parts sit under Fuji PLC modules.