MICREX-SX SPF

MICREX-SX SPF: a compact machine PLC

MICREX-SX SPF is Fuji Electric's compact PLC family combining CPU, power supply and I/O points in a basic unit. It reads machine sensors and executes control of relays, valves or servo commands. The SPF basic-unit range includes different point counts and hardware options. Do not assume every SPF shares the same I/O capacity or supply voltage.

Instruction speed and positioning

Fuji quotes 0.3 microseconds for a basic instruction and 0.87 microseconds for a data instruction. These are instruction times, not a complete program scan. The high-functionality NA0PA basic unit is aimed at positioning with servo systems; the standard NA0PB is for more general equipment. Fuji describes 200 kHz, four-axis pulse output on the relevant high-functionality design. It must not be assigned to every SPF unit.

Programming and communication

SPF can use SX-Programmer Expert or Standard according to the application. Expert supports IEC 61131-3-oriented programming; Standard focuses mainly on ladder logic. Before moving a project, identify the CPU, operation mode, expansion units and project version—not just the software name. RS-232C, RS-485 and Ethernet use suitable small boards or expansion units. Check which port is actually fitted before choosing an operator-panel connection.

The Fuji PLC CPU section covers basic units, while Fuji PLC modules covers add-on I/O. Find engineering tools in Fuji PLC software and manual titles in Fuji PLC CPU documents. Fuji MONITOUCH HMI covers the operator-interface side.


Refine Search