The NPN-NC 3-Wire M18 Inductive Sensor is a metal-bodied sensor with a flat head. It has a detection range of 4mm and is sensitive only to metal. It has proximity sensor capabilities and is designed for industrial environments. However, there are different models of the same type of inductive sensor with different cable and connector structures. It also has UL certification for safe operation.

The sensor has a normally closed (NC) output type. When the sensor does not detect metal, it outputs a - (minus) value. When metal is detected, it switches off and produces a + (plus) value. The sensor has an LED light indicator for its output.

The sensor operates in a voltage range of 10-30V DC and provides a 100mA output current. It is a fast-working sensor with a high counting frequency of 2KHz and anti-interference capabilities.

The sensor can be connected to a contactor (24DC) or to DC relays (without using diodes). It is suitable for use with counters, tachometers, and PLC fast counter inputs. Additionally, the sensor has short circuit and reverse polarity protection.

The sensor has an IP67 protection class, which means it can be used in harsh environments such as oil, mud, and water. The sensor can operate in a temperature range of -25 to +70 degrees Celsius and comes with a 1-year warranty.

To select the appropriate connector type and get answers to your product questions, you can use the comments section. Also note that the sensor has a CE certificate.

NPN is a frequently used sensor technology in industrial automation applications and is generally more commonly used than PNP. NPN sensors have either normally closed (NC) or normally open (NO) output types.

NPN sensors are less expensive and more widely used than PNP inductive sensors. Additionally, NPN sensors have a higher current capacity and can carry more current. Therefore, they can be an ideal option for applications that require high current.

However, the choice of which sensor to use depends on the application. The selection of NPN or PNP sensors is determined based on the connection requirements of the devices the enductive sensor is connected to. Therefore, customers need to consider their needs and connection requirements to decide which sensor technology is suitable for their application.

+ Main page Metric 18 inductive >

+ All model inductive sensor >

+ Complete sensor page >

+ Cables with connector >

+ Counter and tachometer >

+ PLC system for sensor >


Editor's note: "The Derell brand 3-wire M18 inductive sensor is a widely preferred model in the market due to its affordability and durability. It has high counting frequency, making it suitable for tachometer and counter applications. The product also comes with reassuring warranty and technical support services. In addition to this, you can explore our main categories to find other inductive sensor models with detection ranges that may be more or less than what you need."

Please note that all installation processes of DERELL inductive sensor models must be performed by expert technical personnel. The installation should always comply with the relevant ministry laws and regulations (2006/42/AT). Otomasyon AVM does not accept any responsibility for installations or individuals that violate local laws or regulations (for foreign sales). If the instructions provided by DERELL Electronics are not followed, problems outside the scope of the warranty may occur. Detailed information on this issue can be found in the user manual. For more information, please contact info@otomasyonavm.com.

Write a review

Note: HTML is not translated!
Bad Good

Metric 18 - NPN - NC - inductive with connector

  • 148.00USD

  • Ex Tax: 148.00USD

Related Products

NPN-NC+NO-4 Telli M18 İndüktif sensör."Kablolu" 5mm

NPN-NC+NO-4 Telli M18 İndüktif sensör."Kablolu" 5mm

NPN-NC+NO-4 Telli M18 İndüktif sensör."Kablolu" ve düz kafalı_5mm okuma mesafesi 10-30V DC  ger..

142.00USD Ex Tax: 142.00USD

NPN-NC- M18 3 wire 5 mm inductive sensor

NPN-NC- M18 3 wire 5 mm inductive sensor

The NPN-NC 3-Wire M18 Inductive Sensor with cable is a metal-bodied sensor with a protruding head. I..

146.00USD Ex Tax: 146.00USD

NPN-NC-3 wire M18 inductive with cable 8mm

NPN-NC-3 wire M18 inductive with cable 8mm

The NPN-NC 3-Wire M18 Inductive Sensor with cable is a metal-bodied sensor with a protruding head. I..

152.00USD Ex Tax: 152.00USD

NPN-NC-3 wire M18 inductive sensor 8 mm

NPN-NC-3 wire M18 inductive sensor 8 mm

The NPN-NC 3-Wire M18 Inductive Sensor with connector is a metal-bodied sensor with a protruding hea..

153.00USD Ex Tax: 153.00USD

Tags: indüktif sensör