M18 connector type NPN NC
Hello,
In this section, you can find our Metric 18 mm NC (Normally Closed) and NPN (Negative Output -)
Connector Type, metal-sensitive models. These sensors cut off their
outputs when in contact with metal and give a negative - output when
there is no metal present.
When choosing from the Products and Similar Products sections, be sure to pay attention to the following features:
a. Power supply voltage (AC/DC) (AC 220v sensors >)
b. Mounting size (metric mm or square)
c. Detection distance (in mm)
d. Mechanical structure (short/long body, straight or bent head)
e. Output type (NPN/NPN) (NPN vs PNP which model should I choose?)
f. Contact type (NC/NO) (Normally Open/Closed issue?)
g. Cable system (self-wired or connector type)
h. Operating frequency (this issue is very important. There are no low-frequency inductive sensors in our store. Our sensors are at a speed of 2 kHz. You can use them easily in applications such as counters, tachometers, PLCs, smart relays, etc.)
Connector type inductive sensors
facilitate connections and help prevent incorrect connections compared
to wired sensors. Therefore, the assembly process becomes faster and safer.
Also, connector type sensors can be easily disassembled and reused
compared to wired sensors. This makes maintenance operations faster and more efficient.
Another
advantage is that connector type sensors offer more flexible usage.
Especially in moving systems, the use of wired sensors may be limited
or connections may need to be constantly disassembled and reassembled.
However, the use of connector type sensors is easier and more practical
in such situations. However, the price of connector type sensors is higher than that of wired models.
In conclusion, connector type inductive sensors can be preferred due to the advantages such as easier connections, prevention of incorrect connections, more flexible usage, faster assembly, and maintenance.
Note 2: In
addition to the size and output type, the head type of sensors also
varies. The same sensor has both straight-headed and protruding-headed
models at the same distance.
Straight-headed sensors: This model should be used for the most precise and healthy detection. Because the body is already metal and only sensitive to the metal
in front. Therefore, it cannot see unwanted materials from other
directions. (We generally use straight-headed models in our projects.)
Protruding-headed inductive sensors:
These are sensors that can detect both objects in front of them and
metal objects in the neck. However, its use should also be preferred
depending on the structure of the application in the mounting area. They
allow the sensor to detect metal objects from different angles by
providing a wider detection angle than straight-headed sensors. However, when mispositioned, protruding-headed sensors can give false signals. (Which one should I prefer?)
Dear visitor, like all products on our website, our inductive sensors are devices produced for professional purposes in the industrial automation
sector. They have galvanic isolation and high switching speed that can
work in the same environment with devices that may produce potential electrical noise such as frequency inverters, power supplies, and induction motors. (Do not confuse with economical series sensors.)
Please note
that connector type sensors only include sensor and mounting parts.
Connectors and cables are not included in the box. After selecting a
connector type sensor, you also need to purchase a wired connector.
+ Metric 18 inductive sensors home page
+ Inductive sensors home page
+ All sensor models
+ Devices for reading sensors
+ PLC systems for sensors -
Metric 18 - NPN - NC - inductive with connector
The NPN-NC 3-Wire M18 Inductive Sensor is a metal-bodied sensor with a flat head. It has a detection..
148.00USD Ex Tax: 148.00USD
NPN-NC-3 wire M18 inductive sensor 8 mm
The NPN-NC 3-Wire M18 Inductive Sensor with connector is a metal-bodied sensor with a protruding hea..
153.00USD Ex Tax: 153.00USD

