GD12 / Goodrive12

GD12 / Goodrive12

GD12 (Goodrive12) is a dedicated drive for veneer-peeling lathes that turn logs into thin wood sheets. INVT's peeling-lathe case says GD12 was developed on the GD300 platform and incorporates some controller/PLC duties in the drive. Standard GD300 parameters therefore do not describe its whole peeling algorithm.

Knife feed and sheet thickness

In the example, pressure rollers and screw-drive motor start in sequence. Screw-axis encoder feedback tracks knife travel; the drive changes feed as log diameter decreases to target sheet thickness. A separate trim adjustment affects the last sheet length. Precision figures in the case are that machine's test targets, not a guarantee for every GD12 installation.

Checking an installed lathe

Read roller and screw-motor plates, encoder resolution, knife mechanism, target veneer thickness and cut-off arrangement together. The same drive code does not automatically give the same result with different mechanical ratios.

Manuals and documents

Find the documentation topics for this equipment group on INVT VFD Documents.

Use INVT user manuals, checking the complete model code.