GD300 / Goodrive300

GD300 / Goodrive300

GD300 (Goodrive300) is an older Goodrive vector-drive platform adaptable to different AC-motor applications. The manufacturer's extruder case shows sensorless-vector operation of a permanent-magnet synchronous motor. Its GD300-037G-4 frame is listed at 37 kW and 75 A output, figures belonging only to that complete code.

Motor type and setup

Choose the induction or synchronous motor type, enter nameplate voltage/current and perform the relevant motor-identification steps. Heavy low-frequency loading and motor back-EMF matter in the extruder case; its settings do not transfer directly to a fan. GD12 is a veneer-lathe derivative and GD300-16 serves HVAC.

Older GD300 and newer generations

Read the complete frame code, fitted cards and parameter backup. GD300-01, GD300-16 and GD300-19 are separate application branches; newer GD300A or GD350 publications do not replace documentation for this older platform.

Software and connectivity

INVT lists GD300 among the ranges supported by INVT Studio monitoring software over serial connection and Ethernet. It reads, compares and monitors drive parameters. See INVT VFD Software for its role; check the installed port and firmware before connecting.

Manuals and documents

Find the documentation topics for this equipment group on INVT VFD Documents.

Use INVT user manuals, checking the complete model code.