CHF100A

CHF100A

CHF100A is an older INVT variable-frequency drive that adjusts AC-motor speed to the duty of the machine. It can serve variable-torque loads such as pumps and fans, or machinery needing tighter control at low speed: V/f and sensorless vector control are separate operating modes. Choose the mode for the motor and mechanical load. Speed can be commanded from the keypad, an analogue signal, serial communications, a pulse input or a multi-step sequence.

Supply and order code

The CHF100A manual covers 220 V and 380 V supply classes, a 47–63 Hz mains frequency and an 0–400 Hz output-frequency range. These are series limits, not one unit's nameplate. For example, CHF100A-7R5G/011P-4 is listed in the 380 V class at 7.5 kW G / 11 kW P with rated output currents of 17 / 25 A. The G/P duty distinction does not mean that any 11 kW constant-torque motor suits the frame. Read the complete code, motor plate and load cycle together.

Field connections

The range description gives seven programmable digital inputs, one high-speed pulse input, two analogue inputs, two relay outputs and a selectable open-collector/pulse output. AI1 accepts ±10 V; AI2 can take 0–10 V or 0–20 mA. Two analogue outputs can be configured for voltage or current signals. For a PLC speed command or pressure-sensor feedback, match terminal assignments, scaling and jumper positions to the installed unit's wiring drawing.

Operation and protection

Built-in PID, a 16-step speed sequence, speed tracing of a turning motor and automatic voltage regulation are among the published functions. The manual specifies 150% rated current for 60 seconds and 180% for 10 seconds of overload capacity; neither figure is a continuous-current rating. It also covers overcurrent, voltage, temperature and phase-fault protection. Investigate the motor, cable and load before simply resetting a fault.

Working with an older installation

CHF100 and CHV100 have different parameter and terminal arrangements. For a replacement, record motor current, braking equipment, speed reference, serial connection and cabinet dimensions. Find CHF100A manual and wiring topics under INVT VFD Documents.

Software and connectivity

INVT lists CHF100A among the ranges supported by INVT Studio monitoring software over serial connection. It reads, compares and monitors drive parameters. See INVT VFD Software for its role; check the installed port and firmware before connecting.

Manuals and documents

Find the documentation topics for this equipment group on INVT VFD Documents.

Use INVT user manuals, checking the complete model code.