CHF100
CHF100
CHF100 is an older INVT drive that controls AC-motor speed by varying its output frequency. On pumps, fans and winders it lets the motor follow the machine duty rather than always running at full speed. CHF100 and CHF100A are not the same drive: the CHF100 manual describes V/f control for this range; do not assign CHF100A's sensorless-vector mode or terminal count to it.
Read the nameplate first
The CHF100 manual gives separate model tables for 220 V, 380 V and 690 V input classes. It covers 47–63 Hz mains and 0–400 Hz output frequency. As one example, CHF100-7R5G/011P-4 is listed in the 380 V class at 7.5 kW G / 11 kW P with rated output currents of 17 / 25 A. Those paired values describe different load duties. The installed motor current and operating cycle still have to be checked before selection.
Control connections
The range manual describes four programmable digital inputs, one high-speed pulse input and two analogue inputs. AI1 accepts 0–10 V; AI2 accepts 0–10 V or 0–20 mA. Open-collector/pulse and analogue outputs are also covered, while relay-output provision varies on smaller frames. A speed reference can come from the keypad, analogue input, serial connection or a 16-step simple-PLC sequence. If a pump uses pressure feedback, review PID settings, sensor scaling and minimum speed together.
In a pump cabinet
Motor speed can regulate circulation-pump flow, but any bypass contactor, direct-mains path and protective devices are separate cabinet equipment. Energy use depends on the pump curve, piping and hours of operation; a saving from one installation is not a promise for every CHF100. Check stopping, restart and braking settings against the motor and process.
Repair or replacement
CHF100A explains the later range's differences. Record the full CHF100 code, motor current, braking unit, analogue sensors and cabinet wiring. Find manual and connection topics in INVT VFD Documents.
Manuals and documents
Find the documentation topics for this equipment group on INVT VFD Documents.
Use INVT user manuals, checking the complete model code.