SL330

SL330

SL330 is a loom application system coordinating warp let-off and fabric take-up on water-jet weaving machines. SL330 electronically controls two warp beams and fabric take-up. INVT's loom application note makes this distinction. It is therefore unsafe to treat SL310 or SL320 as the same hardware and parameter package.

What works together on the loom?

INVT describes a drive and motor, fabric-tension sensor, loom encoder and wiring harness. The system manages warp tension while relating take-up to loom motion. The note's 300/500/750 kg sensor choices and loom width up to 3.6 metres describe the published solution, not an automatic rating of every installed machine.

Before a replacement

Identify whether there is one warp beam or two, whether take-up is mechanical or electronic, and the encoder signal, tension-sensor range and mechanical ratios. The series name alone does not identify every drive or motor needed on the axis.

Manuals and documents

Find the documentation topics for this equipment group on INVT Servo Documents.

Use INVT user manuals, checking the complete model code.