SL320
SL320: electronic take-up and warp let-off
SL320 is a two-axis servo system coordinating fabric take-up and warp let-off on a loom; it is neither a stand-alone servo motor nor a general-purpose VFD. INVT distinguishes it from SL310, where take-up remains mechanical, and SL330, which controls two warp beams. Their hardware and parameter sets should not be treated as interchangeable.
Components and published ratings
The configuration in the manufacturer's SL320 product table has separate 0.75 kW servo drives with 220 V AC, 50/60 Hz inputs for take-up and let-off. Its servo motors are listed at 220 V AC, 2.05 A, 2.4 N·m rated torque, 7.2 N·m maximum torque and 3000 rpm rated speed. The same table identifies a 3.8-inch HMI with RS-485, a 5 V/720-pulse encoder and a 24 V tension sensor. These values describe the published configuration; compare them with the labels on the installed machine.
System operation
The two servo axes coordinate let-off and take-up. The tension sensor provides fabric-tension feedback and the loom encoder supports motion synchronisation. INVT describes variable weft density and reduced stop marks among the applications of this arrangement.
Selection and commissioning
For an existing loom, identify the mechanical ratios, tension-sensor range, encoder interface and full drive–motor codes on both sides before selecting a replacement. INVT discusses loom widths up to 3.6 metres in its application note; do not assume this is a universal limit for every SL320 installation. Verify parameters and wiring against the installed system's own documentation.
Documents and related pages
See INVT servo systems for the wider equipment group and INVT user manuals for code-specific documents. For the application context, read INVT's note on electronic take-up and let-off.
The INVT Servo Documents page separates topics across this equipment group.