invt GD350A

INVT GD350A High-Performance Variable Frequency Drive

INVT GD350A is a versatile high-performance variable frequency drive designed for applications ranging from general-purpose motor control to demanding industrial machinery. The series can control both standard asynchronous induction motors and permanent magnet synchronous motors (PMSM) and combines several motor-control methods in a single drive platform.

The GD350A is not limited to basic motor speed control. It supports V/F control, open-loop vector control and closed-loop vector control, allowing it to be used in applications ranging from standard pumps and fans to machinery requiring accurate speed and torque control.

GD350A Motor Control Features

Depending on the application and drive configuration, the INVT GD350A can be used with different motor technologies, including:

- Standard asynchronous induction motors
- Permanent magnet synchronous motors (PMSM)
- Asynchronous servo motors
- Motor spindle applications
- Direct-drive motor applications
- Synchronous reluctance motors with the appropriate software configuration

Motor identification and auto-tuning functions help configure the drive according to the connected motor. Correct motor nameplate data should always be entered before commissioning and tuning.

Speed and Torque Control

The GD350A is designed for applications requiring high dynamic performance. According to manufacturer data, closed-loop vector control can provide dynamic speed drop below 0.25%, speed overshoot below 5% and a torque response time of less than 5 ms.

These characteristics can be useful in machinery with rapid load changes, including cranes, winding and unwinding systems, machine tools, textile machines, extrusion equipment and other applications requiring accurate speed or torque control.

G / P Heavy-Duty and Variable-Torque Operation

The GD350A series supports G/P application ratings. The G rating is intended for heavier constant-torque loads, while the P rating can be used for suitable variable-torque applications such as pumps and fans.

Manufacturer specifications indicate overload capability of approximately 150% of rated current for 1 minute in G-type operation and 120% for 1 minute in P-type operation, depending on the applicable model and operating conditions.

Drive selection should not be based on motor kW alone. Motor rated current, starting torque, duty cycle, mechanical load, required speed range and overload requirements should also be considered.

GD350A Communication Options

The GD350A has an expandable communication architecture. Depending on the installed option card, industrial communication options can include:

- PROFINET
- CANopen
- PROFIBUS-DP
- EtherNet/IP
- Modbus TCP
- EtherCAT

These communication options allow the GD350A to be integrated with PLC, HMI and centralized machine-control systems. The communication option should be selected according to the PLC and field network used in the application.

STO Safety Function

The GD350A supports the Safe Torque Off (STO) safety function. According to INVT specifications, the STO function supports SIL2. When activated, STO prevents the drive from producing motor torque.

STO is not a mechanical brake. In vertical-axis, crane or suspended-load applications, the mechanical holding brake and the complete machine safety system must be evaluated separately.

Motor Temperature Monitoring

The GD350A supports several motor temperature sensor types for direct thermal monitoring. Depending on the drive configuration and available analog interfaces, sensor options can include PT100, PT1000, KTY84 and PTC.

Direct temperature monitoring is particularly useful for motors operating for long periods under heavy load or in applications where thermal protection is important.

I/O Expansion and Programmable Functions

The standard digital and analog I/O capability of the GD350A can be expanded with optional cards. Additional relay outputs and an external 24 V power-supply option can also be used in suitable applications.

An optional programmable expansion card allows additional machine-control functions to be implemented within the drive system. Manufacturer information specifies support for instruction-based programming, ladder diagrams and sequential function charts, with a program capacity of up to 16K steps.

Energy-Efficiency Functions

The GD350A includes motor-control functions intended to reduce unnecessary motor losses, including MTPA energy-saving control. In variable-load applications such as pumps and fans, controlling the motor according to the actual process requirement can help reduce energy consumption.

Operator Panel and Software Update

The GD350A can be operated with a multifunction LCD operator panel. Parameter configuration, operating-value monitoring and fault information can be accessed through the keypad.

According to manufacturer information, drive software can be updated through RS485, local serial communication or a suitable 4G expansion option. Local update functions can also support a USB storage device.

Typical INVT GD350A Applications

The GD350A can be considered for a wide range of general-purpose and high-performance industrial applications, including:

- Pump and fan systems
- Compressors
- Textile machinery
- Winding and unwinding machines
- Cranes and lifting systems
- Plastic and extrusion machinery
- Machine tools
- Conveyor systems
- Water and process applications
- Machinery requiring accurate speed and torque control

Before selecting a GD350A model, consider the motor power and rated current, braking requirements, encoder feedback, communication protocol and required digital/analog I/O. Optional cards should be selected according to the actual machine configuration.

INVT GD350A Commissioning and Technical Support

During GD350A commissioning, enter the motor nameplate values correctly and select the control mode according to the application. If an alarm or fault occurs, determine the actual cause before repeatedly resetting the drive.

Related INVT Pages

+ INVT Main Page

+ INVT Fault Codes and Troubleshooting

+ INVT User Manuals and Technical Documents

+ INVT Commissioning and Application Notes

+ INVT GD200A

+ INVT GD20

+ INVT Contact and Technical Support