Persistent memory for data that keeps changing
MRAM stands for Magnetoresistive Random Access Memory. It stores bits using magnetic orientation, so stored data can survive loss of power without a backup battery. The memory is rewritable, making it a member of the nonvolatile RAM family.
The useful combination is frequent updates and persistent storage. A controller can keep changing a counter or state record without treating every update as a Flash erase-and-program operation. The “random access” part of its name refers to addressing; it does not make MRAM volatile like ordinary working RAM.
How a magnetic cell becomes a digital bit
A common MRAM storage element is the magnetic tunnel junction, or MTJ. It contains a reference magnetic layer and a switchable magnetic layer, separated by an extremely thin insulating barrier.
When the layers point in parallel directions, resistance is lower. When they point in opposite directions, resistance is higher. The sensing circuit distinguishes those states and produces a digital value. The assignment of 0 and 1 is a matter of circuit encoding; the important physical distinction is the resistance.
Writing changes the switchable layer. Toggle MRAM uses magnetic fields generated by write lines. Spin-transfer torque MRAM, or STT-MRAM, uses a spin-polarized current to change its magnetic state. They share the MRAM name, but their write mechanisms and specifications differ.
What the advantages mean in a real design
Fast persistent updates: Suitable MRAM products combine RAM-like access with nonvolatility. An update does not require the advance block erase associated with Flash memory. That can simplify handling of small records that change much more often than firmware.
High write endurance: Frequent counters, event records and state changes are useful workloads. Read the selected part's endurance and reliability specifications, however. Unlimited endurance advertised for one device is not a specification for every MRAM implementation.
No retention battery or periodic refresh: MRAM does not need the refresh process used by DRAM. This can reduce backup hardware and help manage system power consumption. It still consumes energy when its interface and read/write circuits operate; nonvolatile does not mean zero operating power.
Useful state after restart: A device can recover its last valid saved record. That is valuable only if software actually placed the required information in persistent memory. MRAM does not automatically capture processor registers, caches or the entire running application.
MRAM alongside the alternatives
| Memory | Storage principle | Design implication |
|---|---|---|
| SRAM / DRAM | Ordinary operation depends on power. | Working memory needs an additional persistence solution. |
| Flash / EEPROM | Stored electrical charge provides nonvolatility. | Update rules and endurance depend on the device. |
| FRAM | Ferroelectric polarization stores the state. | Another option for frequently updated persistent records. |
| MRAM | Magnetic orientation stores the state. | Can offer high endurance and updates without a prior erase. |
MRAM and FRAM are different technologies. Their similar names do not establish compatibility or tell you which uses less energy. Compare capacity and access performance, interface, voltage, temperature grade and cost. For large files, NAND Flash may provide a more suitable cost per bit.
Where persistent updates are useful
A module connected to a PLC might save production totals, running hours or fault events. An industrial IoT node could keep a small queue while its network connection is unavailable. These are possible memory applications, rather than evidence that every controller contains MRAM.
Consider a record updated 10 times per second. Over a 365-day year, that is 315,360,000 updates. Even a tiny record creates a demanding write workload. Its actual effect on each cell depends on record size, address allocation and the memory's write granularity.
For a concrete reference point, Everspin's MR25H40 has 4 Mbit, or 512 KiB, and a 40 MHz SPI interface. Its product documentation specifies unlimited write endurance and 20-year retention. Those claims belong to that device under its specified conditions. Also, a 40 MHz serial clock is not a 40 MB/s payload rate: command, address and data must all cross the interface.
Power failure still needs a record strategy
A persistent cell is not an atomic application transaction. If a 16-byte record is being updated when power fails, software may encounter a mixture of old and new fields. To reduce data loss and inconsistent records, a design can keep two separate record slots, include a sequence number and CRC, and retain the previous valid record until the replacement is verified. Test interruption at different points in the write sequence.
Magnetic storage also requires attention to external magnetic-field limits. Check the selected device when placing it near motors or magnets. Supply transitions, operating voltage and startup timing must follow its datasheet; magnetic retention does not remove those electrical requirements.
Technical references: Everspin — Toggle MRAM cell · Everspin — STT-MRAM mechanism · Everspin — MR20H40 / MR25H40 datasheet · Everspin — MR25H40 specifications · Everspin — Code and data memory application
