Gemo AT961 Potentiometer Controlled analog temperature control

- Possibility to monitor Set and Process values ​​on digital display
- SET Setting: 0 .. 400 oC
    >> Microprocessor based, analog SET controlled single contact temperature controller
- Power Consumption: < 6VA

    This product does not have a 24v dc powered model.

    >> High precision, accuracy
- Inlet : Fe-Const, J type T/C
- Supply Voltage: 100..240VAC, 50-60Hz
- Proportional Time: 10 .. 240 sec.

+ Adjustable Hysteresis value
- Sensor Protection: Relay (Out) output is not energized if the sensor or sensor line is broken, the measurement scale is out of range or the input measurement fails.
- Display : 3 Digits 7 Segments
- Operating Temperature: 0 .. 50 oC
- Out Output: Relay (NO + NC), 250VAC, 2A, Resistive load
- Sensor type: T/C, Fe Const, J type
- Sensitivity : ± 1 oC • Accuracy : ± 1% (Full Scale)
- Protection Class: IP20;
- Button : Micro switch
>> Ability to keep program and control parameters in memory

- Gemo AT961 User Manual (Pdf) -

+ Gemo Price list

+ Gemo Contact

++ Gemo electronic main page

+ Control devices main page  

---------