IC695PSA040

IC695PSA040: Reliable Power in Every Detail
Looking for a reliable power source for your RX3i system? The IC695PSA040 is exactly what you need. Whether you feed it AC or DC, this power supply delivers 40 Watts of energy, keeping your RX3i system running smoothly. With three output voltages, it handles both your modules and relays with ease. No more worrying about your circuits—they're in safe hands with this power supply!
Technical Details:

    Input Voltage: Operates within a range of 85-264 VAC or 100-300 VDC, meaning you can plug it into a regular AC outlet or use a DC source.
    Output Power:
        +5.1 VDC (up to 30W): The main source powering your modules and keeping the RX3i system's brain active.
        +24 VDC relay output (1.6 Amps): Powers relay modules and supports switching operations in your system.
        +3.3 VDC (up to 30W): Provides power to internal RX3i modules, ensuring reliable operation across the board.
    Capacity Considerations: If your module setup exceeds this power supply's capacity, additional modules must be installed in expansion or remote backplanes, as only one IC695PSA040 can be used per backplane.
    Isolation: 250 VAC continuous isolation from input to backplane, reducing the risk of short circuits and keeping your system safe.
    Protection Features:
        Overload Protection: If the output exceeds its capacity (e.g., 5.1V at 7A or 3.3V at 10A), the power supply shuts down to protect itself. It will automatically attempt to restart when the overload condition is cleared.
        Overtemperature Protection: The power supply shuts down if it overheats, with faults recorded in the CPU fault table for easy diagnostics.
        Internal Fuse: A built-in fuse protects the system from severe internal faults, though the power supply usually shuts down before the fuse blows.

LED Indicators:

    Power (Green/Amber): When green, power is supplied to the backplane. When amber, the power is applied, but the supply switch is off.
    P/S Fault (Red): Indicates a power supply failure where it's no longer delivering enough voltage to the backplane.
    Over Temperature (Amber): Warns you when the power supply is nearing or exceeding its maximum operating temperature.
    Overload (Amber): Lights up when one of the outputs is close to or exceeding its capacity.

Wiring and Connections:

Each terminal can accept 14 to 22 AWG wires, making proper wiring essential for safe operation. When using the same AC power source for multiple power supplies, be sure to match the polarity across all devices to avoid damage or injury.
Usage and Safety:

Keep the power supply’s door closed during operation, as AC voltages of 120V or 240V may be present. The power switch controls only the outputs, not the line power. So, ensure proper handling when working near it.

In Summary:
The IC695PSA040 is a powerhouse of reliability, providing stable energy to your system and protecting against overloads, high temperatures, and faults. If you're looking for a power supply that won't let you down, this is the one. It does its job, so your system can keep doing its job—smoothly and safely.

>> IC695PSA040 Power modules User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: GE Fanuc IC695PSA040 Power modules and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."