GE Fanuc PacSystem


What is PACSystems RX3i?

The PACSystems™ RX3i is part of the PACSystems family of programmable automation controllers (PACs). Just like the rest of the PACSystems family, the RX3i uses a single control engine and a universal programming environment, making it easy to transfer applications across different hardware platforms.


Key Features of PACSystems RX3i

   High-Speed Processor: Designed for faster data processing with advanced patented technology.
   Universal Backplane Support: Each module slot supports two types of backplane buses:
       PCI-based high-speed bus for modern, advanced I/O modules.
       Serial backplane for RX3i serial modules and easy migration of older Series 90-30 I/O modules.
   300 MHz Celeron Processor: Built with Pentium III architecture, this processor includes 10 MB of memory for advanced programming and performance.
   Enhanced Memory: Stores ladder logic and machine documentation directly in the controller, helping reduce downtime and improve troubleshooting.
   Open Communication Support: Offers wide compatibility with various communication protocols.
   Variety of Modules: Choose from a broad selection of discrete, analog, and special-purpose modules.
   Hot-Swap Capabilities: Insert or remove modules in both PCI and Serial backplanes without shutting down the system.
   Isolated 24 VDC Terminal: Includes a grounding bar to reduce wiring complexity and improve safety.

Programming and Configuration

PACSystems devices are programmed and configured using Machine Edition software. The software features a consistent user interface across all product families and supports drag-and-drop editing. It also includes a built-in web server for real-time data monitoring during system operation. For more detailed information, refer to the PACSystems CPU Reference Manual (GFK-2222).


Migrating from Series 90-30 to PACSystems RX3i

PACSystems RX3i is specifically designed to make it easier to migrate from Series 90-30 PLC systems. Detailed information about migration can be found in Appendix C of the PACSystems CPU Reference Manual (GFK-2222).


RX3i System Modules

Here’s a list of some of the modules that can be included in an RX3i system:

   RX3i CPU, Ethernet, Expansion
       RX3i CPU, 300 MHz, 10 MB Memory (IC695CPU310)
       RX3i Serial Bus Transmitter Module (IC695LRE001)
       RX3i Ethernet Module (IC695ETM001)
       RX3i Power Supply, 120/240 VAC, 125VDC 40 Watts (IC695PSA040)
       RX3i Power Supply, 24 VDC, 40 Watts (IC695PSD040)

>> GE Fanuc PacSystem User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: GE Fanuc PacSystem and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."        


Refine Search