IC694PWR330

IC694PWR330: High Capacity and Reliable Power Supply
If you need high capacity, the IC694PWR330 power supply is the perfect solution. This 30-watt unit provides reliable energy for your RX3i system with outputs for +5V DC, +24V relay circuits, and isolated +24V DC. Whether you're using 85-264 VAC or 100-300 VDC, this power supply will meet your needs and keep everything running smoothly.
Technical Details:

    Input Voltage: Operates within the range of 85-264 VAC or 100-300 VDC, making it versatile for both AC and DC sources.
    Output Power:
        +5 VDC (up to 30W): Delivers 5.1 VDC nominal with a maximum of 7 Amps.
        +24 VDC Relay Output (up to 15W): Powers relay circuits efficiently.
        Isolated +24 VDC (up to 20W): Can be used to power external circuits or modules.
        Total Power: Maximum of 30 Watts shared across the three outputs.
    Protection Features:
        Overcurrent Protection: The +5V output is limited to 7 Amps. In case of overload or short circuit, the power supply shuts down to protect itself and will try to restart until the condition is cleared.
        Internal Fuse: A 2 Amp fuse is installed in the input line to safeguard the system from severe internal faults.
    Isolation: Provides 1500 VAC isolation from input to backplane for one minute, enhancing protection against potential short circuits.
    Ride-through Time: The power supply can maintain valid outputs for a minimum of 20 milliseconds in the event of a power interruption.

LED Indicators:

    PWR (Green): Lights up when the power supply is functioning correctly. Turns off if a fault occurs.
    OK (Green): Shows that the PLC is operating properly. Turns off if a problem is detected.
    RUN (Green): Indicates that the PLC is in Run mode.

Connections:

AC (Hot, Neutral, Ground) and DC (+, -) power connections are made at the top terminal strip. The isolated +24V output can be used to power external circuits. Be aware that overloading this output will cause the PLC to stop functioning.

Summary:
The IC694PWR330 is an excellent high-capacity power supply for RX3i systems, offering a wide input voltage range and three distinct outputs. With overcurrent protection, an internal fuse, and isolated +24V output, it ensures your system remains safe and operational. Whether you need AC or DC power, this unit delivers reliability and flexibility.

>> IC694PWR330 Power modules User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: GE Fanuc IC694PWR330 Power modules and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."