IC694PWR321

IC694PWR321: Versatile and Reliable Power Solution
Whether you're using AC or DC power, the IC694PWR321 power supply ensures stable and reliable energy for your RX3i system. This 30-watt unit operates in an input voltage range of 85-264 VAC or 100-300 VDC, providing three outputs: +5V DC, +24V DC for relay circuits, and isolated +24V DC. It covers all your system's power needs and keeps everything running smoothly.
Technical Details:

    Input Voltage: Operates from 85-264 VAC or 100-300 VDC, allowing you to use both standard AC outlets and DC power sources.
    Output Power:
        +5 VDC: Provides up to 3.5 Amps with a nominal voltage of 5.1 VDC.
        Relay Output +24 VDC: Delivers 24-28 VDC for powering relay modules.
        Isolated +24 VDC: Supplies power for internal modules or external devices.
        Total Power: A maximum of 30 Watts shared across the three outputs.
    Isolation: 1500 VAC isolation between input and backplane for one minute, adding protection against potential short circuits.
    Protection Features:
        Overcurrent Protection: The +5 VDC output is limited to 3.5 Amps. If an overload or short circuit occurs, the power supply shuts down and will automatically restart when the issue is resolved.
        Internal Fuse: Equipped with a 2 Amp fuse for added security.
    Ride-through Time: The power supply can maintain valid outputs for at least 20 milliseconds during a power interruption.

LED Indicators:

    PWR (Green): Indicates that the power supply is operating correctly. Turns off if a power supply fault occurs.
    OK (Green): Lights up when the PLC is functioning properly. Turns off if a problem is detected.
    RUN (Green): Indicates that the PLC is in Run mode and actively executing.

Connections:

AC (Hot, Neutral, Ground) and DC (+, -) power connections are made at the top of the terminal strip. The isolated +24 VDC output can be used to power external circuits, but note that if this output is overloaded or shorted, the PLC will stop operating.

The IC694PWR321 is a versatile and reliable power supply for RX3i systems, supporting a wide input voltage range and providing three separate outputs. Its overcurrent protection, built-in fuse, and isolated +24V DC output ensure the safety and stability of your system. Whether you're using AC or DC power, this unit will handle the job with precision.

>> IC694PWR321 Power modules User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: GE Fanuc IC694PWR321 Power modules and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."