IC694MDL752

IC694MDL752 DC Negative Logic Output Module: Powerful and Flexible Solution

The IC694MDL752 is a 5/12/24 Volt DC negative logic output module, offering a total of 32 discrete output points arranged in four isolated groups of eight. Each group has its own common terminal, and the outputs are negative logic (sinking type), meaning an ON state results in an active low output. This module is versatile, supporting both TTL mode and 12/24V mode, making it suitable for a wide range of industrial applications such as motor starters, solenoids, and indicators.

In TTL mode, the outputs can switch loads across +5 VDC and can sink a maximum current of 25mA per point. In 12/24V mode, the outputs can switch loads ranging from +12 to -24 VDC, capable of sinking up to 0.5A per point. Each group of outputs is electrically isolated from the others, allowing different types of loads (e.g., TTL, 12V, and 24V) to be driven by the same module. However, care should be taken to avoid electrical noise interference when mixing TTL and inductive loads.

Key Features

    32 Output Points: Arranged in four groups of eight outputs each, each group with its own common terminal.
    Negative Logic Outputs: Sinking type outputs that turn ON in an active low state.
    Versatile Modes: Supports both TTL mode (5V) and 12/24V mode, enabling the module to handle various load types.
    Internal Pull-up Resistors: Ensures high logic levels when the output point FET is OFF, which is particularly useful for TTL applications.
    Backplane Isolation: Opto-couplers provide isolation between the field side and the logic side for safety.
    LED Indicators: Individual numbered LEDs show the ON/OFF status of each output point.
    No Special Diagnostics: No special fault or alarm diagnostics are provided by the module.

Specifications

    Rated Voltage: 5V DC for TTL mode, and 12 to 24V DC in 12/24V mode
    Output Voltage Range: 4.75 to 5.25V DC (TTL mode); 10.2 to 28.8V DC (12/24V mode)
    Number of Outputs: 32 (four isolated groups of eight)
    Isolation: 250 VAC continuous (Field to Backplane); 1500 VAC for 1 minute (Field to Backplane)
    Output Current:
        TTL Mode: 25 mA per point
        12/24V Mode: 0.5A per point, 4A maximum per group, and 3A maximum per group common pin
    Inrush Current: 4.6A for 10ms
    On-State Voltage Drop:
        TTL Mode: 0.4V DC maximum
        12/24V Mode: 0.24V DC maximum
    Off-State Leakage Current: 0.1 mA maximum
    Response Time: 0.5ms maximum (both ON and OFF)
    Power Consumption:
        260mA (maximum) from the 5V bus on backplane
        12mA to 44mA per group depending on user supply voltage (5V, 12V, 24V)

Wiring and Connections

The module uses two male 24-pin connectors (Fujitsu FCN-365P024-AU) for output circuits. Connections can be made directly to field devices using a cable with a mating female connector or through pre-wired cables such as IC694CBL327 and IC694CBL328. These cables can also connect the module to DIN-rail mounted terminal blocks.

Recommendations

The IC694MDL752 module is highly versatile, capable of switching between TTL and 12/24V DC modes, making it suitable for a wide range of applications, from low-power TTL loads to higher-power inductive loads. The module's isolation and flexibility in driving different load types in different groups make it a reliable solution for industrial automation systems.

For applications with high current, ensure that connections to the group common use both pins to handle currents between 3 and 4 Amps.


>> IC694MDL752 Output modules User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: GE Fanuc IC694MDL752 Output modules and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."